Recent content by fredeuce

That makes sense now. I looked all over for a dip stick but none to be found.

I am presently working on a Model T engine and transmission. First trip through one of these for me. Can anyone tell me what these taps are for ? Also is there a tech resource available on this forum or elsewhere that explains the workings of the T engine and transmission?

An update on my efforts to swap out the 3.22:1 gear set. I have now been provided with another diff centre which had as original fitment a 3.22:1 gear set. The major difference with the housing is that there is an extra rib just above the filler plug. The interior has greater space for that...

Generally speaking I think you can define early v late as Flathead powered v OHV powered however the use of an auto trans also determines the ratio used so the line between the two categories is a bit blurry.

After some closer examination of casting shown in the original post I had a look at another complete unit to ascertain if there was any difference. This unit has a 41/11 (3.73) gear set. Looking inside where my pinion is fouling I can see the casting is different and provides a relief in the...

I have a Ford style differential that was equipped with a 39/10 gear set. (3.9:1) I am attempting to fit a later gear set that is 29/9 (3.22:1 ) to this early housing. I have discovered it does not fit and requires some relieving to get it to fit. Clearly, there are different castings for...

I am piecing together a 53 Customline and am curious about the steering column bracket. This is an Australian delivered car. In the picture you see a gap on the RH side. Why is this present? Is there something that fits into that space? [/URL][/IMG]

I am going through the clutch pushrods on a '53 Customline. The bolts are stepped and use wave washers. The hole that the bolts are inserted into are "D" shaped. It all looks a bit odd. Is there meant to be a bush of some kind that goes into these rods? [/URL] [/IMG]

Has anyone out there done this to a 52-53 Ford Customline? I am looking to fit one from a 1980's Ford Falcon (Australian) , similar to a Granada. I am fitting the Disc brakes to the front from this model Falcon so curious to know what others have done and how they went about it.

Is there any way to refurbish these items if new replacement parts aren't available

That was going to be my next move after inquiring about factory type replacements.

As the title to this thread suggests I am working on an Australian delivered 54 Ford Customline steering box. The model in Australia is a carry over from '53 in that they still ran a flathead engine and also ran the king pin front suspension. This steering box suits such a model.The box has...

When attaching pictures to posts on Fordbarn I always resize the picture by using Microsoft Office Picture Manager. Simply find the picture you want. Highlight it and then do a right click and a menu opens up. Select "Open with",then select Microsoft Office Picture Manager. When the picture...

After some trial and error and some straightening of these brackets this is the arrangement I have come up with. Seems to achieve what is set out in the drawing.

Don, thanks for that illustration. Great find. Well done.