Recent content by Ford coupe

my 55 vicky 6 volt at times horn will blow other times not . it seems to be better with car revved up a bit.Could it bethe relay and is there a way to test?

where is the cheapest place for 4 600 16 www tires prefer in danada due to shippig..Thanks in advance

79 Ford granada jatco auto ****** need a 20 tooth speedo cable gear part no or if you have a gear..Thanks in advance

Most of it as old as the car...All pigtails at park and tail lights new...Would be afraid to go play around under dash..

So bot rears light up with park lts on but pass side dimmer than driver side..Both brake lts are on and seem bright enoghThankls

After looking a little closer i find when i turn on right signal the right rear signal plus both front come on Put on the left and left rear comes on plus both front..Yes they do flash.. hate wiring problems but any help appreciated..

When i turn on my left or right signal all four lights flash...How are they grounded as that is a possibility i am told...Grounded just by being bolted to body or??

SORRY Was 272 to 325

So car has a 18 tooth gear and going to try a 19 as it looks like that should have been in it new but possibly since it was a special edition it maybe had different size tires or whatever...Part not to dear so hope for best...

sORRY FOR THE FOUL UP hAVENT BEEN ON HERE FOR A WHILE

tire HOPE THIS HELPS sizehr78-14 cant get no from diff but when going 50 mph speedo reads 58

79 Granada changed differential from original325 to 272 as that was all i could get..works fine but speedo out about 10 mph..Now is there a different gear for end of speedo cable that can fix that or??? If so where could i maybe get that part? The ****** is a jatco 6000 i beleive..Thanks in...

Ok Gene f and Kolutz Removed cylender and find that the push rod goes into the new cylender about 3/8 0f an inch further than in the pump removed so yes should have got old one rebuilt but since the new one works fine i am going to use an adjustable push rod or possibly turn mine ito a...

Yes as above it could also be in the piston in the mc itself so i have to make the push rod work and the spring well?? Thanks

Thanks so much Hopefully enough info to get me out of this mess...I beleive my car probably had a PS mc on it..