Recent content by Duffy1

Late 31 s/w indented firewall with fold down arm rest ?? I have the same car but arm rest are on both sides of rear seat . No fold down arm rest in center of seat.

Good chance you will crack the manifold if you tighten it to 45#. Watch the gasket and when it starts to compress you have it tight enough . Do a search .Lots of posts on this subject.

Takes a powerful truck to pull an enclosed trailer.

Ditto post 28.

Proper sized jets will correct this problem as P S testified .I had the same problem and put in proper sized jets . PROBLEM SOLVED.

I have seen loose radius rods cause this. Replace radius ball or put in washer over existing ball . Vendors have the washer.

I want one .

This comparison is equal to the comparison of different types of oil.Do a search and read all the opinions.

Had same problem . Retorqued head , still leaked ,removed antifreeze,still leaked, added distilled water with old fashion Bars Leak solved problem .

Do a search and you can find info on all your questions . Also you can find info on how dangerous original 2 blade steel fans are . Is your fan blade original ?

Hills ; Michell O D and Michell Trans; $5000 Flat Land ; F-150 ; $2500

Do a search . Lots of info on hangers . If you have a SS muffler and tail pipe DO NOT clamp the hanger tight against the pipe . Leave loose so tail pipe can expand .

Some times when the plates get hot they expand away from each other and loose contact. Spent 3 hrs one cold Nov night on the Natchez Trace trouble shooting a fellow club members car with same symptons you describe . Get hot, stopped running ,cool down would run until it got hot again . Needles...

Suggest you do a search . A lot of negative comments on B engine posted here about 2 weeks ago .

Is that an original 2 blade fan?