Recent content by 1928ar

Up for sale is a pretty much complete ar brake set up. Backing plates are complete and ready to bolt on. I believe every thing is there to the best of my knowledge except for front drums and the brake rods. Located in Shelton ct For pictures or more info email at jamesdemko82@yahoo.com

all i did was got i round dowl and stuck it in the tank put a line at the top and took a measurment devided it by 4 and notched the stick and its close enuff for me untill i change the float

hes a grat guy to talk to he is very knoledgable about cars his car has a hudson teirplane engine in it if spelled it correctly

i know stuff like this has been covered in the past i rebuilt the shift tower over last winter and it still pops out of third gear i have a later style transmission with an ar tower due to the multi disc cluch assembly being removed to put in a regular clutch so im wondering if that is causing...

i looked at the armature today and there was alot of carbon build up on it i cleaned it off and hooked it up to my cordless drill and used a test light and it is working again is this a common problem or old junky brushes that i got with it and a few others and i put a set together to get it...

ok ill give it a try tomorrow if i have a chance and ill let you know how i make out thanks for the help

tom the generator is not charging i checked the brushes and the springs and they seem fine is there a way to check the armature and the feild coils with an electrical tester thanks in advance jim

i tryed polarizing it this morning and it still didnt charge i put a jumper across the cut out when it was running the wire sparked when it made contact and the needle jumped a little bit but then went back to zero and when i turn the lights on it goes to negative so ill check the brushes and go...

i havent had my car out yet this year yet due to no time i started it today and let it run for a bit and noticed the generator wasnt charging it is a 5 brush power house and it was charging when i put it away last year do i need to repolorize it or should i start somewhere else thanks in advance jim

i have an early a i put it back together the shorter notch goes towards the distributor

i took the distributor and the lower shaft out a few weeks ago to replace my head gasket and now i cant remember which way it goes does the end with the shorter notch go into the bottom of the distributor thanks in advance jim

here it is

well i guess it didnt work to well i took some pictures today of my 5 1/2 month old son sitting in the drivers seat in my sports coupe can some one help me out on how to post a picture thanks

my march of 28 sport coupe's are numbers matching at 64120 and it had closed end bumpers on it and i had gottin if from the origonal owner