help please

[cohammer60]

Just a few more parts , these are ford pistons that was told were for a model but just not sure.

 

[Hicktick]

I see a piston box , you got hoodwinked .

I don't see anything that is model a .

 

[cohammer60]

There are 11 boxes of pistons with pistons marked ford on them but I can't find those numbers on the box online anywhere.

 

[barnstuf]

The 01T piston is 1935-42 era, the cylinder heads are also V8 flathead 1939-48 era and also the intake manifold is V8.

 

[Charlie Stephens]

The 01T piston is 1935-42 era, the cylinder heads are also V8 flathead 1939-48 era and also the intake manifold is V8.

The heads have 21 studs with a water outlet in the center so they are 1937-38.

Charlie Stephens

 

[SeaSlugs]

that "american bosh" distributor also has the Essex logo on it. id believe that to be off an essex car... I could be completely wrong tho...

the gauge says at the bottom "revs per minute in hundreds" so its an early tachometer for what i dont know.

strange to me to see engine miles and the standard number drum on a tachometer. and why they would label it engine miles. could this be off a stationary generator/engine of some sort? Kind of keeping to a standard of if a car needs lubed every 500 miles so does this and this is the equivalent "miles" its been ran. Much like today on small engines and stationary engines/generators we use an hour meter to regulate when to do service.


Also im not sure why else there would be 2 red lines that id assume would be where you want to keep the needle for optimal HP/torque.

 

[Bob C]

The rods are Chevy 18G = 837107 33-E34, 18M = 838389 37-47,
18F = 836601 32 6cyl.

Bob

 

[Tinker]

Cool sw tach... At least i think it is a tach...? Ya didnt hit the lotto but dont trash any of it.

 

[cohammer60]

I did get a lot of part and want bore you with much more but you never know if you don't ask.

 

[SeaSlugs]

nah your not boring us, most of us like all eras of cars and love to see old parts!

 

[mshmodela]

Just a few more parts , these are ford pistons that was told were for a model but just not sure.

Those heads do not appears to be Model A heads.... ? Flat head V8 heads or ?

 

[cohammer60]

Thanks for all the help.