Zeke...PA
Well-known member
I purchased a valve kit from Mac's Antique 8BA-6501-KT which should have 16-8BA-6505 valves. They are still researching this question. There were two style valves in the kit see picture, 8 of each. 8 had 8BA on the stem the dark headed valve and 8 had 00212H0309 on stem the polished head. I cut three angles on the pitted hardened seats (hard on stones). The valves lapped in at the center of the face, great. I stuck the cam back in and two adjustable lifters and two assembled valve to check if the length was acceptable. Both set at correct clearance. The block has been hogged out to 3 5/16 3.310 due to the heavy pitting (stuck) I didn't have pistons at the time and needs to be honed to the 3.313 finish. Is there a difference in the valves ? Stem correct size, key way in the correct spot, both the same length. ??? Thanks Zeke