NEW products available thread

[35fordtn]

Neat. Finally those bolts are available. Will you be making the special reduced head castle nuts as well? Please say yes!

Yes we have them as well.

 

[Tim Ayers]

Yes we have them as well.

Boom. Great news! I'll definitely be ordering some

 

[Zax40]

Carpenter Reproductions announced they are making hubcaps for 1948-56 3/4 tonners. There part number 2J-1130-A.

That's great news! My shop truck/parts chaser is a 55 f250 and has those caps. They are hard to find used and go for crazy money on eBay

 

[rustynut4247]

1938/40 coe grill bar assem available us made also 41/7 soon

 

[35fordtn]

Couple NEW ones.

https://thirdgenauto.com/product/1932-ford-steering-pitman-arm/

https://thirdgenauto.com/product/1936-39-ford-car-1936-50-pickup-shifter-lever-lower-portion-new/

 

[petehoovie]

Couple NEW ones.

https://thirdgenauto.com/product/1932-ford-steering-pitman-arm/

1936-39 Ford car / 1936-50 Pickup shifter lever lower portion NEW 91A-7210

 

[Felton]

Hello Everyone,

I revived the Burns Racing Equipment brand. I have the single & dual carburetor intakes, along with A & B side covers and linkage kits available again.

I just finished making an aluminum 2 Bolt Timing Cover for Ford Flatheads 1932-1948.


This is available at Millworks Hot Rod

https://www.millworkshotrod.com/products/2-bolt-timing-cover?_pos=1&_sid=b224113bd&_ss=r

Thanks for looking

 

[petehoovie]

Hello Everyone,

I revived the Burns Racing Equipment brand. I have the single & dual carburetor intakes, along with A & B side covers and linkage kits available again.

I just finished making an aluminum 2 Bolt Timing Cover for Ford Flatheads 1932-1948.


This is available at Millworks Hot Rod

https://www.millworkshotrod.com/products/2-bolt-timing-cover?_pos=1&_sid=b224113bd&_ss=r

Thanks for looking

 

[Felton]

Thanks for showing sharing large format pictures of the part. I appreciate it.

 

[KiWinUS]

Hello Everyone,

I revived the Burns Racing Equipment brand. I have the single & dual carburetor intakes, along with A & B side covers and linkage kits available again.

I just finished making an aluminum 2 Bolt Timing Cover for Ford Flatheads 1932-1948.


This is available at Millworks Hot Rod

https://www.millworkshotrod.com/products/2-bolt-timing-cover?_pos=1&_sid=b224113bd&_ss=r

Thanks for looking

Is it available with vacuum port

 

[Newc]

One time Burns has some old Cadillac manifolds too ? newc

 

[Felton]

Hello KiWinUS,

No I am sorry there is vacuum port option.

 

[Felton]

Hello Newc,

I have heard & seen picture of a Jeep intake manifold, but I have not seen a Cadillac one. If anyone has pictures I would love to see it.

I have been asked to remake the Jeep one. Maybe I will find one someday (or borrow one)

Thanks

 

[Mac VP]

This would fall into the "They're back in stock" category. Our last run of the 8BA-6335 rear seal retainers sold out over a year ago. We were able to have another run made last month, so they are back in stock. This is the retainer for the upper rear rope seals on the 49-53 type blocks. Made in the USA as before.

http://www.vanpeltsales.com/FH_web/FH_images/Engine-Partspics/8BA-6335-rearseal-retnr-1.jpg

 

[petehoovie]

This would fall into the "They're back in stock" category. Our last run of the 8BA-6335 rear seal retainers sold out over a year ago. We were able to have another run made last month, so they are back in stock. This is the retainer for the upper rear rope seals on the 49-53 type blocks. Made in the USA as before.

http://www.vanpeltsales.com/FH_web/FH_images/Engine-Partspics/8BA-6335-rearseal-retnr-1.jpg

 

[Newc]

32/35 grill bars: used to be $2.50 at drakes. Now had some made 30" long -22 guage steel. sell a pair for $6 +shipping. chromeable quality finish, slightly open on inside for finish [ not crimped shut] Newc NOTE:: price now $3 @

 

[petehoovie]

32/35 grill bars: used to be $2.50 at drakes. Now had some made 30" long -22 guage steel. sell a pair for $5 +shipping. chromeable quality finish, slightly open on inside for finish [ not crimped shut] Newc

 

[Karl Wescott]

1936 Coupe back window handle

I am now making the 1936 Coupe back window handle in investment cast stainless. These will be available polished as a replacement for the chrome ones used on "standards" and unpolished so the user can paint for use on a "deluxe".

 

[petehoovie]

Re: 1936 Coupe back window handle

I am now making the 1936 Coupe back window handle in investment cast stainless. These will be available polished as a replacement for the chrome ones used on "standards" and unpolished so the user can paint for use on a "deluxe".

 

[1952henry]

This would fall into the "They're back in stock" category. Our last run of the 8BA-6335 rear seal retainers sold out over a year ago. We were able to have another run made last month, so they are back in stock. This is the retainer for the upper rear rope seals on the 49-53 type blocks. Made in the USA as before.

http://www.vanpeltsales.com/FH_web/FH_images/Engine-Partspics/8BA-6335-rearseal-retnr-1.jpg

Do you have the rubber pieces for the 8RT dust shield?