Drbrown
Well-known member
My go-to person for helping figure out issues and for rebuilding ignition and gas system components is our member Mr. Charles S. He again helped me with an issue causing my '47 engine to stumble whether under load or no load. I post this to possibly help others.
First drive after a year in stoirage was couple weeks ago. Car started and ran fine around the City. Week later it started and idled okay but engine stumbled at and above 1500 rpms while in neutral. Charlie suggested it was probably the coil or perhaps less likely the condensor. The existing coil was a Bosch Blue Flame unit that had low useage. It did not get hot. I got a NAPA coil and condensor Charlie recommended, installed just the coil and the engine runs fine.
First drive after a year in stoirage was couple weeks ago. Car started and ran fine around the City. Week later it started and idled okay but engine stumbled at and above 1500 rpms while in neutral. Charlie suggested it was probably the coil or perhaps less likely the condensor. The existing coil was a Bosch Blue Flame unit that had low useage. It did not get hot. I got a NAPA coil and condensor Charlie recommended, installed just the coil and the engine runs fine.