Bell Housing Removal

[sethkestenbaum]

This is a little dated, but here is a blog post that I didn't finish a few months ago. I've got a few more that I will update and post showing the progress in my engine removal. I also want to again thank Al Clarke for his help while I was in Albany.

http://oldcarroadtrip.wordpress.com/2014/12/31/i-own-an-engine-hoist-november-14-2014/

 

[sethkestenbaum]

https://wordpress.com/post/38272052/697

Here is a latter dated post.... I still need to get the more recent ones done.

 

[Scott W]

How do I remove the brake clutch pedal rod? Does the pin drive from the outside to the inside of the bell housing? I attempted this once before I had the bell housing remove and the pin didn’t budge. Should I replace the clutch adjusting rod also? Thanks

 

[nkaminar]

Do not drop the transmission or bell housing on your front teeth. I did that in 1959 and have had caps on both front teeth since then.

 

[Y-Blockhead]

How do I remove the brake clutch pedal rod? Does the pin drive from the outside to the inside of the bell housing? I attempted this once before I had the bell housing remove and the pin didn’t budge. Should I replace the clutch adjusting rod also? Thanks

To remove it you need to drive it from the inside to the outside.