Positive ground battery disconnect switch?

H

Hoodooman

Member
Hi everyone, New 52 customline owner. I'm having difficulty finding a battery disconnect switch to fit my positive side top post battery. This is my first positive ground vehicle. The positive post is a bit larger than the negative. Does anyone have a recommendation for a battery disconnect that will fit?

Thank you for any help!
 

Attachments

  • IMG_6305b.jpg
    IMG_6305b.jpg
    70.1 KB · Views: 95
  • IMG_6310b.jpg
    IMG_6310b.jpg
    78.6 KB · Views: 74
  • IMG_6308b.jpg
    IMG_6308b.jpg
    48.2 KB · Views: 68
Last edited:
English cars used to have a positive post mount disconnect switch. Lucas made IRRC. Hard to find and pricey but a really nice set up.
 
An option would be to install a battery safety/security switch. I have 12 volt neg ground. The switch I installed fit right thru a punch-out hole in the fire wall. The on-off knob is inside the car and easily reached from driver's seat. Being inside car provides some security and reachable during emergency i.e. accident. Best thing _ saves opening and closing car hood every time you use the car. Ran Positive cable from batt to switch terminal on engine side of firewall, then from switch to starter solenoid. I can provide info of where I bought the switch from and photos too.
 
Drbrown said:
An option would be to install a battery safety/security switch. I have 12 volt neg ground. The switch I installed fit right thru a punch-out hole in the fire wall. The on-off knob is inside the car and easily reached from driver's seat. Being inside car provides some security and reachable during emergency i.e. accident. Best thing _ saves opening and closing car hood every time you use the car. Ran Positive cable from batt to switch terminal on engine side of firewall, then from switch to starter solenoid. I can provide info of where I bought the switch from and photos too.
Click to expand...

I have the same. These type of switches can be used from 6V-36V systems. Cole-Hersee makes a really good one.

https://www.elecdirect.com/cole-her...-battery-disconnect-switch-single-pole-off-on

If you order one, get it from Rick @ Noble Speed. He is a great small business who offers some really neat parts. Please support him

https://www.noblespeedequipment.com/product/battery-master-kill-switch
 
Hoodooman said:
Hi everyone, New 52 customline owner. I'm having difficulty finding a battery disconnect switch to fit my positive side top post battery. This is my first positive ground vehicle. The positive post is a bit larger than the negative. Does anyone have a recommendation for a battery disconnect that will fit?

Thank you for any help!
Click to expand...


As long as EITHER post is isloated, the battery will be disconnected.
Put your switch on the other smaller post.
 
Thanks everyone. From what I've seen, every connector has a .6X size ID which is only good for the negative terminal. I'll keep looking. Thanks for the input, much appreciated!
 
Hoodooman said:
Thanks everyone. From what I've seen, every connector has a .6X size ID which is only good for the negative terminal. I'll keep looking.
Click to expand...
Don’t see why having the disconnect on the “hot” terminal rather than on the ground terminal will make a difference.
 
On my 52 truck. We installed a Cole hearse marine grade switch mounted on or in one of the battery supports. Coming off the negative side in between the solenoid. So neg battery cable goes down to switch and comes back up to solenoid it looks to casual observer that it’s the same cable.
 

Attachments

  • IMG_6027.jpg
    IMG_6027.jpg
    50.8 KB · Views: 95
  • IMG_2423.jpg
    IMG_2423.jpg
    58 KB · Views: 85
When I want to disconnect my battery, I just remove the ground cable (positive in your case) from the battery using a 1/2 inch wrench. No muss, no fuss, and costs nothing. Since the battery is in plain view, this is the best and cheapest solution. No wear and tear either
 
Plus, it gives you the opportunity to quickly clean the terminal with one of those nifty two-piece brushes.:)
 
JayChicago said:
Don’t see why having the disconnect on the “hot” terminal rather than on the ground terminal will make a difference.
Click to expand...

It only matters to sanctioning bodies like the NHRA.
They always say it should be on the positive side and should stop all electrical functions.
Their reasoning is, if the switch is on the negative side of the battery, the alternator is not being interrupted and could still generate power and cause issues, since it is still capable of generating power in the electrical system.
(Back feed of the ignition)
 
1948F-1Pickup said:
It only matters to sanctioning bodies like the NHRA.
They always say it should be on the positive side and should stop all electrical functions.
Their reasoning is, if the switch is on the negative side of the battery, the alternator is not being interrupted and could still generate power and cause issues, since it is still capable of generating power in the electrical system.
(Back feed of the ignition)
Click to expand...


I understand the NHRA position but on my daily driver my disconnect switch breaks the ground. The reason being that with the ground disconnected if something happens to touch the hot post to the frame nothing will happen. If you break the hot lead as per the NHRA and somehow there is a connection between the hot post on the battery and a ground source then sparky sparky. JMO
 
Totally agree


51504bat said:
I understand the NHRA position but on my daily driver my disconnect switch breaks the ground. The reason being that with the ground disconnected if something happens to touch the hot post to the frame nothing will happen. If you break the hot lead as per the NHRA and somehow there is a connection between the hot post on the battery and a ground source then sparky sparky. JMO
Click to expand...
 
Way back in the early days of my automotive training we were always told to disconect the ground first no matter which polarity you were working with. I've seen batteries explode and wrenches welded to the vehicle by not following this simple rule. Tim
 
pistonbroke said:
Way back in the early days of my automotive training we were always told to disconect the ground first no matter which polarity you were working with. I've seen batteries explode and wrenches welded to the vehicle by not following this simple rule. Tim
Click to expand...

Me too, and, I have had the “sparky, sparkies” when I have forgotten.
 
Positive or Negative it doesn't really matter in the grand scheme of things; they both produce the same result. Use whichever you're able to obtain and install.

If you're using a disconnect switch and running *all* your power through it, pay attention to both the constant and intermittent current ratings. The Cole-Hersee posted earlier has a relatively low current rating (20A continuous, 125A intermittent). If you have upgraded to a later generator that's capable of outputting >20A you will exceed that switch's rating. Cranking current is also something that should be considered if using the switch in your starting circuit.
 
Last edited:
You must log in or register to reply here.
Back
Top