rear brake drum puller

[KiWinUS]

I always say if a hub comes off with a puller other than the ones mentioned, it wasn't tight enough!

I would be interested in one , No i do not have the box . If you are interested in selling one give me a call. Thanks Stan 775 364 4367 Northern Nevada

Sorry super busy. Message message through barn is best for me. $200 plus shipping. Cheers

 

[Veeder]

Stan

Make sur you back off the pads!!!

 

[dean333]

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

 

[petehoovie]

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

 

[rockfla]

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

The Vintage Precision one fits them both.....ALL!!! 28-48

 

[dean333]

Rock, that’s what I thought when I bought my puller but it doesn’t fit my 37.

 

[rockfla]

Rock, that’s what I thought when I bought my puller but it doesn’t fit my 37.

The Vintage Precision will, I've pulled my 32 Ford & 39 Mercury with it!!! Works swimmingly, Fixing to use it on my 47 Mercury here shortly!!!..... AS advertised "28-48"

 

[dean333]

Roc, do you have a photo and the measurements of the opening? Thanks!

 

[rockfla]

Roc, do you have a photo and the measurements of the opening? Thanks!

Tim


I will in about 45 mins to an hour when I get home!!!

 

[rockfla]

Tim
Here is a photo from vintage precision's web page, as you can see, the cap that screws onto the axle end and you push against, has a long slot that it can slide in for short OR long snout hubs!!!!! As it states, it will pull from Model A's to 48 V8's!!!!

 

[petehoovie]

Tim
Here is a photo from vintage precision's web page, as you can see, the cap that screws onto the axle end and you push against, has a long slot that it can slide in for short OR long snout hubs!!!!! As it states, it will pull from Model A's to 48 V8's!!!!

 

[rockfla]

Tim
I had a little project to finish up in my shop so sorry on the delay in getting these posted, I hope this is what you were asking for???

 

[petehoovie]

Tim
I had a little project to finish up in my shop so sorry on the delay in getting these posted, I hope this is what you were asking for???

 

[Adriatic Machine]

I have the other style that gets secured behind 3 lug nuts. I like this style much better

 

[51504bat]

I have the other style that gets secured behind 3 lug nuts. I like this style much better

Until you warp a drum in the removal process.

 

[PGBuick]

I am also interested in the hub puller if you still have one, KiWinUS.
Thanks

 

[KiWinUS]

I am also interested in the hub puller if you still have one, KiWinUS.
Thanks

Still available. Barely used. $200 plus shipping. No wooden box. Pm me if interested. Cheers

 

[PGBuick]

New Vintage Precision is $175. Thanks anyways

 

[Zeke5180]

FYI
The New Vintage Precision hub puller will not work on a hub that has a protruding ring as my 37 has.

Zeke

 

[Ben38]

I had that problem on my 38 too. I called them and they recommended sanding off some of the surface roughness on the ring. Worked like a charm.