Weber 32/36 adapter

[Richard in Anaheim CA]

Does anyone have a source for a carburetor adapter for Weber 32/36 4 bolt to Stromberg 3 bolt manifold?

Richard
Anaheim CA

 

[nkaminar]

I have not found one but have not looked long and hard. Take the parts to a machine shop to have an adapter made. Or buy the manifold for the Weber.

 

[denis4x4]

Offenhauser makes one and you might try Pierce Manifolds also

 

[jack backer]

Is this what you are looking for?

 

[nkaminar]

OK, Jack, what is the source?

 

[Y-Blockhead]

Does anyone have a source for a carburetor adapter for Weber 32/36 4 bolt to Stromberg 3 bolt manifold?

Richard
Anaheim CA

Richard, not sure this one will fit but check the dimensions. 4-bolt (3 1/4 in. x 1 7/8 in.) https://www.summitracing.com/parts/ofy-5159

 

[mercman from oz]

Weber 32/36 adapter ? - jack backer

 

[jack backer]

I don’t have a source, it was in a parts lot I bought when I was building Vw’s

 

[nkaminar]

That adapter would work well on the Loveless super charger available from https://frenzelsuperchargers.com/products/p/ford-model-a-b-banger-supercharger

Maybe both ends so that a Weber manifold could be used. Would have to modify the bracket.

 

[jack backer]

Why not just run a Holley 94? It ‘listens’ to engine vacuum unlike a Stromberg 97,making it efficient as well as pleasant to drive,and has way less moving parts than the 32/36.. it’s sexier too if looks matter, the 32/36 looks like a Datsun carb…which it was.

 

[denis4x4]

Why not just run a Holley 94? It ‘listens’ to engine vacuum unlike a Stromberg 97,making it efficient as well as pleasant to drive,and has way less moving parts than the 32/36.. it’s sexier too if looks matter, the 32/36 looks like a Datsun carb…which it was.

I’m running Weber 32/36 on both of my A’s plus a pair on my XJ6c Jaguar. Redline sells an adapter to use the same type air cleaner as the Strombergs. The 94 is a two barrel carb where the 32/36 is a progressive two barrel and is far more responsive. FYI, the Weber 32/36 was standard on a multitude of European and Japanese cars before the advent of EFI.

 

[nkaminar]

I am very happy with my 32/36 Weber. I did some port changes to get better response and added the horn to get a little more air flow. You really can notice the change when the second throat opens up. I like the fact that it has a real air filter.

 

[fordcragar]

I made adapters for my Model A out of aluminum plate, for the Weber’s.