Clutch grabs high

[kwisor]

Thanks for the help been under my car all day finishing up my new clutch install Kevin

 

[jerrytocci]

UPDATE: The pressure plate needed adjusting. Funny thing, though, the adjustment nuts were peened into the slots at the end of each bolt

 

[larrys40]

The adjustment screw is rusted and I will not force. When the new one comes in I will pull boards and cover and do it right

You dint have to pull the floor boards, do it from below . Totally unnecessary to pull floorboards unless you have quick lift out units with no screws and no Matt .

 

[jerrytocci]

I had to adjust the pressure plate fingers from the inspection opening on the bell housing

 

[old ugly]

I had to adjust the pressure plate fingers from the inspection opening on the bell housing

thats not a lot of fun isn't it?
i bet that took you a while.

 

[jerrytocci]

OLDUGLY....Yes it was a pain!( 2 hrs.) but the results were worth it. I should have been a proctologist