1933/34 and 1935/36 Rumble Hinge Bracket

[tsbrock]

Does anyone know if the 1933/34 rumble seat hinge BRACKET (the part bolted to the body... not the lid) is the same as the 1935/36 hinge bracket? Are they interchangeable?

 

[aandkt]

Send a picture of where it belongs, I recently did mine in my 36

 

[tsbrock]

Three pictures attached.
1. Shows the location in the rear of 1934 Roadster where the hinge bracket mounts to body
2. Shows the hinge bracket for a 1933-34 rumble seat hinge system

3, Shows the hinge bracket for a 1935-36 rumble seat hinge system



The two brackets for the 1933/34 and 1935/36 look so similar.
Are they interchangeable?



Note: I pulled these pics off internet to illustrate my question... hope that is ok.

 

[petehoovie]

Three pictures attached.
1. Shows the location in the rear of 1934 Roadster where the hinge bracket mounts to body
2. Shows the hinge bracket for a 1933-34 rumble seat hinge system
3, Shows the hinge bracket for a 1935-36 rumble seat hinge system

The two brackets for the 1933/34 and 1935/36 look so similar.
Are they interchangeable?

Note: I pulled these pics off internet to illustrate my question... hope that is ok.

 

[Karl Wescott]

That part (call it a trunnion for lack of better description) is used on 1932 3 Window, and 1933-39 with rumble.


In the past we made them in aluminum. I recently made a half dozen as a test run for a steel rumble hinge kit for the 1932 3 Window, I will be making more but it will be at least 6 months.