'94 F150 E4OD trans control lever

[F-150 guy]

My daughters '94 F150 E4OD trans control lever the cover on the end of the lever has came loose and slides off as far as the OD on/off control wires allow it to. Is it OK to gorilla glue it back or will that make it difficult to repair/replace the OD switch if repair/replacement become necesary?

 

[1942deluxe]

The cap is fairly inexpensive and was still a good number from Ford as far as I know.
Part number should be F2UZ-7A241-CA. The little plastic tabs break on them. Sold
quite a few thru the years...

 

[KULTULZ]

Try Here - https://www.amazon.com/Ford-F2UZ-7A...CAP-HANDLE/dp/B000O0JQSS?tag=atomicindus08-20

EDIT- Slurred URL Corrected

 

[F-150 guy]

Thank you fellows for your replies. One more question. How does one disconnect the wires to the OD switch and reconnect/reinstall the switch on the new part and fasten it on the lever? I have AMD and cannot see details very well/ Thank you.

 

[KULTULZ]

See if this description helps - https://www.fixya.com/cars/t26256583-install_overdrive_button_94_f150_regular

The actual SW connects to a harness end connector . The replacement bezel should snap on at the end of the shift lever.

If not get back.

 

[paul2748]

Doesn't work

Try Here - https://www.amazon.com/Ford-F2UZ-7A214-CA-Regular-?tag=atomicindus08-20 F2UZ-7A214-CA - CAP-HANDLE/dp/B000O0JQSS

 

[KULTULZ]

Doesn't work

Slurring my URLS again ...

https://www.amazon.com/Ford-F2UZ-7A...CAP-HANDLE/dp/B000O0JQSS?tag=atomicindus08-20

 

[F-150 guy]

Thanks guys for the replies and advice. Her husband took care of the problem. He's not much in to working on vehicles so that kinda surprised me.