Radiator shroud emblem removal

[Smooth_One]

Stupid question but how do I remove the emblem on the shroud?
I want to try and keep it intact and re-install after I clean it up.

 

[WHN]

Just tap it from the back.

You might want to put some oil on it before hand and let it sit. Looks rusty.

Light tap putting the handle end of a large screw driver against emblem.

Replacements are not as good.

Enjoy.

 

[Smooth_One]

Just tap it from the back.

You might want to put some oil on it before hand and let it sit. Looks rusty.

Light tap putting the handle end of a large screw driver against emblem.

Replacements are not as good.

Enjoy.

Thanks so much! I thought it unscrewed somehow.

 

[JKY]

I used a socket that was sized to the hole. Worked well.

 

[katy]

Is it just glued on? Or?

 

[midgetracer]

It is only a press in fit, but rust makes a real tough glue sometimes.

 

[Will N]

What would you guys recommend if the emblem is too loose a fit in the radiator? It there a way to flare out the ring on the back of the emblem a little? Or maybe just a little silicone?

 

[Brentwood Bob]

The cup will detach if you fuss with it very much. Epoxy has worked fo me.

 

[jetmek]

Ive seen them lightly spot welded cup to shell