34 ford truck handles

Z

Zarzamora

Junior Member
Quick question,
I found these on the HAMB classifieds … will they fit a 34 Ford truck?

Thanks in advance.

Interior handles and cranks for windows

user113016_pic255491_1295217480.jpg
 
It depends if you are just sticking a handle on to crank the window up or down yes they will but for continued use they will fall off due to lack of attachment.

The handle you show are a 37 and what appear to be two 38's. They will fit the 34 pu shaft but these handle attach with a roll pin. To install them on your pu shafts requires drilling a hole to index the retaining roll pin.

Correct 32-4 pu handles are of a different design and are attached via a screw that retains the handle thru a hole drilled in the the crank boss head of the handle.
 
DICK SPADARO said:
It depends if you are just sticking a handle on to crank the window up or down yes they will but for continued use they will fall off due to lack of attachment.

The handle you show are a 37 and what appear to be two 38's. They will fit the 34 pu shaft but these handle attach with a roll pin. To install them on your pu shafts requires drilling a hole to index the retaining roll pin.

Correct 32-4 pu handles are of a different design and are attached via a screw that retains the handle thru a hole drilled in the the crank boss head of the handle.
Click to expand...

Thank you so much ... my search continues...
 
I purchased mine from Mac's for my 34 pickup they are good quality, however you will have to modify the head of the retaining screw on the door handles as they were drilled a little off center & too small, the window handles were ok. Typical of imported parts.
 
31chevy said:
I purchased mine from Mac's for my 34 pickup they are good quality, however you will have to modify the head of the retaining screw on the door handles as they were drilled a little off center & too small, the window handles were ok. Typical of imported parts.
Click to expand...

Awesome!! :) So the aftermarket handles have been good… I haven’t had any luck with allot of aftermarket stuff but I’ll take your word for it …
Can you give me the website to Macs or just do a website search for Macs?
 
macsautoparts.com Are you keeping your 34 pickup stock or street rodding it? Could you post a picture or email me one ?
Thank you, Gary.
 
31chevy said:
macsautoparts.com Are you keeping your 34 pickup stock or street rodding it? Could you post a picture or email me one ?
Thank you, Gary.
Click to expand...

Well, it's not my ride it belongs to a buddy of mine, we attend the same church but I'll get pictures posted of it here soon. He's turned it into a hot rod...

Is yours stock? I’m in the process of looking but I don’t want to get in to a total restoration. I would like to find a running restoration if at all possible.:)
 
I looked again and they are made on China .If you try and fit the original screw the head is to big, but they come with a new screw ,So why not use it most people would prefer a new screw it fits perfect ,[/QUOTE .Typical of imported parts.??

31chevy said:
I purchased mine from Mac's for my 34 pickup they are good quality, however you will have to modify the head of the retaining screw on the door handles as they were drilled a little off center & too small, the window handles were ok. Typical of imported parts.
Click to expand...
 

Attachments

  • handle 001.jpg
    handle 001.jpg
    80 KB · Views: 10
  • handle 002.jpg
    handle 002.jpg
    47.1 KB · Views: 8
Mine came without screws & were made in Hong Kong. I thought it strange they did not have the screws with them. They were purchased from Mac's.
 
FlatheadTed said:
I looked again and they are made on China .If you try and fit the original screw the head is to big, but they come with a new screw ,So why not use it most people would prefer a new screw it fits perfect ,[/QUOTE .Typical of imported parts.??
Click to expand...

You know I called them and they told me it didn't come with any mounting hardware... :confused:

Did you use the old screw or did a new one come with the handle?

I also asked for the window crank handle and they don't carry it..:(
 
Hi, I'm trying to politely answer your question regarding door handles without making this a sales pitch but since I originally answered and you were directed elsewhere with no results let me comment that I have the door and window handles in question in stock with the correct mounting screws.
 
DICK SPADARO said:
Hi, I'm trying to politely answer your question regarding door handles without making this a sales pitch but since I originally answered and you were directed elsewhere with no results let me comment that I have the door and window handles in question in stock with the correct mounting screws.
Click to expand...

Awesome!! How much are you asking and shipping to 78213 :)
 
It would be nice if the Venders could advertise on a venders list /page .like it used to be .

DICK SPADARO said:
Hi, I'm trying to politely answer your question regarding door handles without making this a sales pitch but since I originally answered and you were directed elsewhere with no results let me comment that I have the door and window handles in question in stock with the correct mounting screws.
Click to expand...
 
I do advertise and support Ford Barn! Big ad on home page right under editorial. This is a forum setting and not an area to conduct business. see phone number in ad.
 
You must log in or register to reply here.
Back
Top