Best way to fix this dent

[FlatheadTed]

This is a tool we use quite a bit its a spot welder that welds a stud on the dent and you pull on the end like a pop rivet with the slide hammer. Also the blending clear ,Ted

 

[FlatheadTed]

Edit post

 

[corvette8n]

This is a tool we use quite a bit its a spot welder that welds a stud on the dent and you pull on the end like a pop rivet with the slide hammer. Also the blending clear ,Ted

Thanks for the tip I didn't know blending clear even existed.

 

[corvette8n]

Worked on my dent today, I used a heat gun then hit it with an air duster can turned upside down, it came out a little, I then hit the backside with a small rubber hammer and it popped out pretty even, almost unnoticeable.
Thanks for the all you suggestions.