EvapoRust

[Redbird]

You can't beat Evaporust. I have use it on many items from parts to chrome pieces to tools, and it comes through every time. I recently purchased some Model A tools from members and on ebay. Soaking and a little bit of wire brush does wonders. Pictures show the results. Should they be painted or raw steel?

 

[31 Model A]

Used some on my Will Rogers manifold heater I got from Bert's, cleaned up real nice.

 

[31 RPU]

Yeah, after you soak parts in evaporust and wire brush them, they come out to a bright finish.

 

[Synchro909]

What is the active ingredient of Evaporust? We don't have it here but I'm sure there is something similar. Is it Phosphoric Acid???

 

[Mitch//pa]

What is the active ingredient of Evaporust? We don't have it here but I'm sure there is something similar. Is it Phosphoric Acid???

here is a thread that may help
mainly post 1
http://www.fordbarn.com/forum/showthread.php?t=43106

 

[brum1]

Great product, ideal for tools or other thin parts

 

[mrtexas]

What is the active ingredient of Evaporust? We don't have it here but I'm sure there is something similar. Is it Phosphoric Acid???

Not phosphoric acid.

 

[mrtexas]

Great product, ideal for tools or other thin parts

This is cheaper and more concentrated and what I use:

http://rustdepot.com/rustremover/rustremover.htm

 

[Synchro909]

Not phosphoric acid.

No?? Then what?
There are plenty of tannin based rust converters about that turn rust into a stable, inert layer of black stuff that can be painted over or anything. But it converts the rust, not removes it.

 

[ursus]

It is a form of ethylenediaminetetraacetate, an iron chelating agent. Check out the Evaporust website for information.

 

[John Duden]

after a while of useing it will get a brownish film on it, that a brass brush takes off easily. works best when it is warmed

 

[colin1928]

What is the active ingredient of Evaporust? We don't have it here but I'm sure there is something similar. Is it Phosphoric Acid???

We do have here I use it a lot but it is not cheap

 

[Synchro909]

We do have here I use it a lot but it is not cheap

I've never seen it - where do you get it??

 

[colin1928]

I've never seen it - where do you get it??

I get it in Mulgrave here is their Ph No 8541 7500

 

[Redbird]

Where the tools that came with the cars painted black?

 

[pgerhardt]

I've never seen it - where do you get it??

Harbor Freight carries it. I pick some up when I get those 20% off coupons.

Picture 1: My evaporust derusting station (for small parts)
Picture 2: My fender stripping/derusting station (much more work!)

 

[DougVieyra]

W.C. Fields, the renowned alcoholic drunk who feared the negative effects of drinking water, drank a 1920's equivalent of Evap-o-rust daily, to help counter the evil effects of drinking water.

So with that kind of endorsement, I look forward to eventually using it on my next de-rusting project.

- Doug Vieyra, ex-vaudevillian

 

[Mikeinnj]

It is a form of ethylenediaminetetraacetate, an iron chelating agent. Check out the Evaporust website for information.

Say ethylenediaminetetraacetate ten times fast....

 

[BILL WILLIAMSON]

Say ethylenediaminetetraacetate ten times fast....

Say this REAL FAST, before havin' COFFEE,
"I SLIT A SHEET, A SHEET I SLIT, UPON A SLITTED SHEET I SIT"
Bill W.

 

[Synchro909]

Say this REAL FAST, before havin' COFFEE,
"I SLIT A SHEET, A SHEET I SLIT, UPON A SLITTED SHEET I SIT"
Bill W.

Oh SH!T !!