y block timing marks

[sticks]

first y block build , there are no timing marks on the balancer i have and the pointer is just a pointer no marks either am i missing something here or what any help Would be appreciated THANKS

 

[Y-Blockhead]

Should be timing marks on the damper. Your damper outer ring may have rotated and the marks not where you expect to find them.

 

[sticks]

Thanks y blockhead that's what i was thinking, I'll have ti try to find a good one , I'll put a post in wanted

 

[zoegrant]

Maybe the marks are on the pulley edge like they are on a small T-Bird ?

 

[Ole Don]

I had my damper rebuilt by Damper Dudes. If the heads are not back on yet, make your own marks.

 

[carbuilder]

Be carful the dudes put my mark out of sink. I bought a new balancer from austrailia.

 

[46yblock]

Some dampers dont have timing marks, but only a raised button on the edge. Instead the marks are incorporated into the pointer which actually has 3 or 4 points, with the degrees also marked on the pointer(s) You just need the right pointer. I have two, but will be out of town for at least two weeks from tomorrow. If you cant find one I can send one in a couple weeks.

 

[46yblock]

Here is a picture of the pointer. So much for memory, as there are 5 points.
0, 3, 8, 10 14 degrees. If you want I can have my wife send this tomorrow. Send me a PM in the next couple hours though.

 

[LOWRIDER]

If I recall correctly the damper with the timing marks on them the marks will be in line with one of the "spokes" on the damper. Assuming it hasn't slipped.