Wiring the 36

mrtexas

mrtexas

Well-known member
I'm finishing up wiring the 36 woodie. Does the dash light switch have a use other than turning the dash lights out when the headlights are on? Looks to me like the dash lights only turn on when the lights are on.
 
If you stay with the factory layout you will only have dash lights when the lights are on and the dash switch is pulled out. Instead of this I disconnected the blue with black tracer wire that goes to the dash lights and ran a wire from the light switch over to the main board on the firewall. This allows me to use the dash lights without having to rely on the headlights.

Given the outrageous price these light switches are getting on epay, I am surprised that no one is reproducing them ('35-'37 are the same). They are simple and uncomplicated. They shouldn't be that difficult to make. I mentioned this twice to Bob Drake (in person) and got no response.

Tom
 
flatheadfan said:
If you stay with the factory layout you will only have dash lights when the lights are on and the dash switch is pulled out. Instead of this I disconnected the blue with black tracer wire that goes to the dash lights and ran a wire from the light switch over to the main board on the firewall. This allows me to use the dash lights without having to rely on the headlights.

Given the outrageous price these light switches are getting on epay, I am surprised that no one is reproducing them ('35-'37 are the same). They are simple and uncomplicated. They shouldn't be that difficult to make. I mentioned this twice to Bob Drake (in person) and got no response.

Tom
Click to expand...
I'm thinking of bypassing the switch so they stay on when the headlights are on only. I have an original switch.
 
Listen to Terry. If you have a '36 switch, then by "default" with the switch pushed in your dash lights should go on with the headlights. You pull the switch out to kill the dash lights.

There are times when driving my '36 at night that the dash lights create an annoying glare on the flat glass windows. No reason why it shouldn't be wired per Henry's wishes. If someone has installed a '35 switch, then it must be pulled out with the headlights on to see the gages at night. That's a '35 only feature. '36 & '37 switches work the same way.

PM me if you have a '35 switch. Maybe we can work out a trade.
 
You must log in or register to reply here.
Back
Top