Winter Projects

[Fred K-OR]

Well, I am on the list to get a Lentville Huckster conversion done in the spring, so I will have a lot of cab and bed parts to sell off later...

I put a Lentville Huckster body on my old 29 CCPU a few years ago. They work great and since then I have picked up a number of trophies from car shows with it. Also a lot of interest everywhere I take it.

If you have questions, PM me and I will try to help.

 

[CarlG]

I got one of those things from a swap meet and tried it. The cap on the filler tube made a rattle when the engine was running so I took it back off. Just my experience with one.

Fred,
Mine was doing the same thing. I took and put a small bead of red silicone around the inside where the cap mated with the body. Let it set for an hour or so, then while it was still pliable, put a piece of Saran plastic wrap across it and closed the lid. Let it set for another hour, took the Saran wrap off. No more rattle.

 

[Skrain]

The vent I got has a pretty tightly fitting cap with a snap(?) type stop to hold it open, so I haven't noticed any rattle so far. Of course, on my truck at this point, it would be hard to pick out one more rattle!
Mine came from Mike's. Just slips on and replaces the stock cap, and comes with a clip to secure the hose to the steering column.