Winfield Head

S

saxman657

Member
I recently purchased a rebuilt engine and it came with a Winfield 7:1 head and was hoping someone could help me identify if this is an original or a remake. Note the 1-12 above the Winfield name and the "PAT PEND" below the name. I'll be driving this on a B Diamond block with a Stipe 305 touring cam.
 

Attachments

  • IMG_6324.jpg
    IMG_6324.jpg
    30.8 KB · Views: 115
  • IMG_6323.jpg
    IMG_6323.jpg
    30.3 KB · Views: 104
  • IMG_6322.jpg
    IMG_6322.jpg
    32.1 KB · Views: 129
  • IMG_6321.jpg
    IMG_6321.jpg
    27.9 KB · Views: 139
From the shape of the combustion chamber you have a 6 to 1 head. Looks to be original if it’s cast iron. The 7 to 1 had a crows foot design combustion chamber.
 
It definitely looks like an original head. I don't think its a 7:1 though.
You would have to CC the head to be positive. It could have been surfaced a time or
two in all the years. Are there any other stampings on the surfaced pad on the head?
 
It looks like a good combustion chamber design. I think you will be happy with its performance regardless of the compression ratio.
 
No other stampings, and unfortunately I can't make out any serial number on the pad below the PAT PEND stamping, but it really does sound like it is 6:1 or maybe slightly higher depending on what someone might have done to the surface. Looking forward to see how she performs.
 
Thanks for the input. I'm sure I'll be happy with it as well. I'll be using a Stipe touring cam with it on a B diamond block with Stipe oil pump so hopefully she'll be good on the open road
 
The first number of the serial number indicates the compression ratio. Winfield used the crows foot on the 7:1, but not on all 7:'s. It looks like the plugs are 14mm??? Early Winfield's used 18mm. He made a few in aluminum, I think only for the Super Winfield's?
 
Jim Brierley said:
The first number of the serial number indicates the compression ratio. Winfield used the crows foot on the 7:1, but not on all 7:'s. It looks like the plugs are 14mm??? Early Winfield's used 18mm. He made a few in aluminum, I think only for the Super Winfield's?
Click to expand...

These do look like 14mm, which would line up with other reports of the "1-__" series being 6:1 with 14mm. I saw a hi-res version of this photo and I'm 90% sure there's a serial number under the paint. Just gotta dig it out of there and you'll find the compression ratio.
 
Jim Brierley said:
The first number of the serial number indicates the compression ratio. Winfield used the crows foot on the 7:1, but not on all 7:'s. It looks like the plugs are 14mm??? Early Winfield's used 18mm. He made a few in aluminum, I think only for the Super Winfield's?
Click to expand...


WOW, my serial number is 9111. The number cast into the top left front
is 1-28, crows foot chamber with 18mm plugs.
 
alexiskai said:
These do look like 14mm, which would line up with other reports of the "1-__" series being 6:1 with 14mm. I saw a hi-res version of this photo and I'm 90% sure there's a serial number under the paint. Just gotta dig it out of there and you'll find the compression ratio.
Click to expand...

I've looked closer and can see the faint inscription of a 6 in the serial number area, so I'm sure its a yellow head. Spark plug holes are 18mm with 14mm adapters so I assume this is an early yellow head?
 
saxman657 said:
I've looked closer and can see the faint inscription of a 6 in the serial number area, so I'm sure its a yellow head. Spark plug holes are 18mm with 14mm adapters so I assume this is an early yellow head?
Click to expand...

If you want to convert back to the 18mm plugs, Winfield originally spec'ed those with the Champion 7 plug, which was used on mid-30s Ford V8s. The equivalent modern plug is the Champion D16. However, I've seen people report that they get better results on cast iron yellow heads with the D14. This is another place where JimB's opinion would be more informed than mine.
 
alexiskai said:
If you want to convert back to the 18mm plugs, Winfield originally spec'ed those with the Champion 7 plug, which was used on mid-30s Ford V8s. The equivalent modern plug is the Champion D16. However, I've seen people report that they get better results on cast iron yellow heads with the D14. This is another place where JimB's opinion would be more informed than mine.
Click to expand...

Is the gap the same? Recommended Spark plug for the 14mm and gap?
 
You must log in or register to reply here.
Back
Top