Window Roller to Grease or Not?
- Thread starter Jwawhite
- Start date
Daves55Sedan
Well-known member
Jwa, My '55 has all the original steel rollers. When my cars were all apart, I cleaned the roller parts in paint thinner, then after they dried, I applied lubriplate all over the roller parts and they still work like new.
Lubriplate is what was used at the factory for lubricating these. After about ten years, the lubriplate may become hardened and powdery, then it becomes necessary to clean or scrape off the old stuff and apply new lubriplate again and go another ten years.
You can also buy lubriplate in small cans like axle grease and caulk tubes too, but I find it is more applicable for all around automotive use just to have the little cans with metal lid that re-seals (like an old paint can).
Lubriplate was also used on door striker plates and mechanism, door and trunk hinges, hood and trunk latches, so its best to keep a can around for the old junkers.
Lubriplate is what was used at the factory for lubricating these. After about ten years, the lubriplate may become hardened and powdery, then it becomes necessary to clean or scrape off the old stuff and apply new lubriplate again and go another ten years.
You can also buy lubriplate in small cans like axle grease and caulk tubes too, but I find it is more applicable for all around automotive use just to have the little cans with metal lid that re-seals (like an old paint can).
Lubriplate was also used on door striker plates and mechanism, door and trunk hinges, hood and trunk latches, so its best to keep a can around for the old junkers.
GLAmes
Senior Member
A little research found a grease that lasts longer than lithium. Only $8 a tube at O'Reilleys too.
https://www.amazon.com/Lucas-Oil-Ounce-10301-Grease/dp/B000IG20RW?tag=atomicindus08-20
https://www.amazon.com/Lucas-Oil-Ounce-10301-Grease/dp/B000IG20RW?tag=atomicindus08-20
rotorwrench
Well-known member
There may be some modern synthetics that are as good or slightly better than Lubriplate 105 GP grease. The Lubriplate white grease such as 630 and the Aero grease will work even if they get wet so this is why many manufacturers use them. all greases deteriorate over time. Normal life expectancy is about 5-years and only 2-years in harsh conditions.