Whoops

[Dennis Pereira]

Working on a rear brake assembly things were going to smooth . I put the E-brake return spring on the wrong lever I had 4 springs two silver and two black .

 

[wrndln]

Dennis, did you use the notched 2 screwdrivers to install the spring - see picture attached. They make the job much easier.

Rusty Nelson

 

[Dennis Pereira]

Dennis, did you use the notched 2 screwdrivers to install the spring - see picture attached. They make the job much easier.

Rusty Nelson

Thanks Rusty maybe I'll make a couple to get it off .

 

[mercman from oz]

Dennis Pereira working on a rear brake assembly

 

[mercman from oz]

Notched Screw Driver - wrndln

 

[nkaminar]

I just finished putting the rebuilt rear backing plates on. I had to take the radius rods off to get them on. But this was easier than taking off the arms and putting the emergency brake spring on by laying under the car.

 

[Dennis Pereira]

I just finished putting the rebuilt rear backing plates on. I had to take the radius rods off to get them on. But this was easier than taking off the arms and putting the emergency brake spring on by laying under the car.

I agree that's the way I'm doing it also but my body is off the frame .