Which thread could this be?

Oberfranke

Oberfranke

Junior Member
Unfortunately, the question does not quite fit here. I have an American thread to determine. It is not for a Ford.
The outer diameter is about 10.9 mm and the pitch is about 1.28 mm. Which thread could this be?
Thanks in advance.

Gero
 
You'll find the UNF 7/16-20 on the top part of the head studs on your Model A (for comparison)
 
A pitch gauge like this can be very useful:

https://www.amazon.co.uk/Stainless-Degree-Thread-Measuring-Imperial/dp/B07D9LMWJF/ref=sxin_16_pa_sp_search_thematic_sspa?content-id=amzn1.sym.bcf45e91-7734-4444-8467-834c3de4defe%3Aamzn1.sym.bcf45e91-7734-4444-8467-834c3de4defe&cv_ct_cx=thread%2Bpitch%2Bgauge&keywords=thread%2Bpitch%2Bgauge&pd_rd_i=B07D9MNDL6&pd_rd_r=ceea3506-c880-4abf-82d3-c9747171c7b6&pd_rd_w=KdnEG&pd_rd_wg=h9PF3&pf_rd_p=bcf45e91-7734-4444-8467-834c3de4defe&pf_rd_r=8YAR8NW9WBWXERKRQ4NF&qid=1657185614&sr=1-3-b75715df-0cbd-4312-a971-de5362256967-spons&smid=A3MWTOW3Y5FBF1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyUDlRN1RNMVYzQjdFJmVuY3J5cHRlZElkPUEwNzE3NDMxMURUNEI2RkZCTjNaSyZlbmNyeXB0ZWRBZElkPUEwMDc2MTU5TDFBVDRHODZENE5SJndpZGdldE5hbWU9c3Bfc2VhcmNoX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

Maybe also available to be shipped in Germany.
 
You must log in or register to reply here.
Back
Top