Which bolts where?

mountinpie

mountinpie

Member
OK, I picked up this project with lots of parts and lots of hardware. Question is, how do I figure out where all the bolts are used? My son and I have been sizing/sorting bolts, but I don't have anything to tell me which size bolts go where. Any guidance?

Thanks!
 

Attachments

  • 213 (2).jpg
    213 (2).jpg
    47.7 KB · Views: 87
mountinpie said:
OK, I picked up this project with lots of parts and lots of hardware. Question is, how do I figure out where all the bolts are used? My son and I have been sizing/sorting bolts, but I don't have anything to tell me which size bolts go where. Any guidance?

Thanks!
Click to expand...
MAFC & MARC published this book that is available from them or at most Model A Parts Stores:
 

Attachments

  • Hardware book.jpg
    Hardware book.jpg
    29.5 KB · Views: 28
mountinpie,

I would recommend purchasing the 1928-1931 or 1928-1932 Ford Parts Price List.

For example, if you look up the Oil Pan, the Pan is listed along with the cap screw and washer, as it turns out the Valve Cover bolts and washers are the same.

In the back of the book, each piece of hardware is listed with valuable information such as length, thread, finish, etc.

Hope this helps.

Darryl in Fairbanks, 25 degrees
 
look at the brattons catalog he list all the screw sizes and tells you what they are for in all the sections that he sells the scr's.
 
You must log in or register to reply here.
Back
Top