Wheel wobble

B

Bill H.

Member
Tightened up drag link, tie rod ends, wheel bearings, steering box, and radius ball is tight in its socket. Still have wheel wobble at low speed. What's next?
 
Well, only thing I can still think of is toe-in.. 1/16" inch toe in is needed, if it is toed out, you will get a wobble :)

Hope this helps!
 
Jack up the car and spin the wheel to see if it runs true. If you are running original wires and hydraulic drums you need a spacer and without one you might have bent the wheel when you tightened it..

Charlie Stephens
 
oooh.. Just thought.. What happens when you jack up the front end and spin the wheels? do the tires track even? if not, the bead might not be seated on the tires, and the tires also could likely stand to be balanced..
 
You must log in or register to reply here.
Back
Top