What year/vehicle is this intake?

[COE Dan]

Ford Barn,

The following 2 pictures are of an intake manifold on a '34 Ford pickup. It's not stock unless it was an uncommon option. Any clue on what year/application the manifold was for?

Thanks.

Dan

 

[Zimmco]

Looks like a 35 with an adapter for a Columbia rear or gas heater on the intake.

 

[ford38v8]

I think it's aftermarket. I've never seen a stock intake with that round projection on top.

 

[DavidG]

Alan,

Many '34 and '35 factory manifolds have that round projection or boss on the top surface.

 

[ford38v8]

Learn something every day.

 

[skidmarks]

The vacuum take off plate was used with a southwind heater or a marvel mystery oiler. The Columbia rear had a larger hose bib for more volume

 

[jimvette59]

Ford 38V8 there is a boss that is also not drilled by the distributor . They look like they could be drilled and tapped for manifold vacuum .

Retraction : It probably is stock .

 

[scooder]

I agree with DavidG,
Looks like a stock 1935 manifold to me, those round projections aren't very unusual, seen um on quite a few of these and on some later ones.
Martin.