What is it?

Stephenorf

Senior Member
I have this black plastic thing-a-ma-bob doohicky that I have no idea what it is or where it goes. The rats found it and decided it would be a good piece of plastic to gnaw on. Here is a pic of the Ford engineering number. I looked on the internet for this nuber but drew blanks. Any one have any idea what this is based on the engineering number (C8AB-62130A46-A)? The car is a 1968 Galaxie 500, and this was on the rear floorboard when I opened to door. Pretty sure it wasn't laying there when I parked the car 8 years ago. I'm thinking the rats found it and moved it to the floorboard. :confused:

490724
 

Attachments

  • 1968 Ford Galaxy 500 - C8AB-62130A46-A.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A.jpg
    37.3 KB · Views: 146
Last edited:
Is it some sort of coil spring isolator? I don't know


The "C8..." I believe means 1968, so that would apply to your car.
 
ok, it seems to be at least 1/2 gone. But here are some pics of whats left. I'm wondering if it might be some wire shield from under the dash, like maybe near the steering column. It seems rodents were chewing on wires on the driver's side near the firewall.

490729


490730


490731


490732


490733
 

Attachments

  • 1968 Ford Galaxy 500 - C8AB-62130A46-A 2.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A 2.jpg
    108.1 KB · Views: 135
  • 1968 Ford Galaxy 500 - C8AB-62130A46-A 3.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A 3.jpg
    45.9 KB · Views: 134
  • 1968 Ford Galaxy 500 - C8AB-62130A46-A 4.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A 4.jpg
    42.9 KB · Views: 134
  • 1968 Ford Galaxy 500 - C8AB-62130A46-A 5.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A 5.jpg
    37.1 KB · Views: 133
  • 1968 Ford Galaxy 500 - C8AB-62130A46-A 6.jpg
    1968 Ford Galaxy 500 - C8AB-62130A46-A 6.jpg
    28.1 KB · Views: 134
Possibly a seal around the steering column at the firewall????
I was thinking along those same lines, but I would think Ford would have used a rubber grommet at the firewall. Maybe it is a cover for the gromet....although I don't know why there would be a cover for the gromet. I wish I had an illustrated Master Parts catalogue for 1968 Ford full size cars.
 
I wonder if there is a way to positively identify the part using the engineering number?

Yes, but you would need the correct period text. It is called a MASTER CROSS REFERENCE LIST. I only have reference up to the 1964 model year.
 
Could it be a plastic dust shield housing that goes around
the gas pipe filler neck to the quarter panel...



.
 
Part # is C8AZ-62130A46-A "Retainer, Carpet to Steering Column".

That makes sense. Looks like some rats chewed their way from the engine compartment to the interior of the car, or from the interior to the engine compartment via the firewall at the steering column hole.
 
Back
Top