What is and where does it go??

[Wisconsinjimmy]

I know or at least am fairly sure this is a distributor part can you help me?

 

[BRENT in 10-uh-C]

It is not inside the distributor but in the oil pump drive. It is the bushing sleeve.

 

[Wisconsinjimmy]

Brent, I am at a total loss on this, this bushing was in with the parts I took off with the distributor, does it fit in with the oil pump drive gear?
Thanks

 

[Wisconsinjimmy]

Thank you will get it changed in the morning.

 

[Wisconsinjimmy]

it is together

 

[BRENT in 10-uh-C]

the pencil is on the part

Thank you, ...great illustration!!

 

[jerseyboy]

the pencil is on the part

A picture is worth a thousand words! Best illustration I've seen in a long time!

 

[Wisconsinjimmy]

WOW that is an OH $%*# where do I start.
Have the engine together and timing dern close and it popped ran for 3-4 seconds I am happy but when by yourself and trying to inject either and operate all the levers and rods from under the hood jeez!!!!

 

[Farrell In Vancouver]

Go easy on the ether, its dangerous and cleans the oil off the rings/guides

 

[Wisconsinjimmy]

Well it starts and idles on her own with no either or other help just have to give it a healthy choke and wide open throttle (wot). The brakes do not work, I am going to grease everything and see if that helps but it runs that is a big plus. Now I have to get all over the auction company to get me a title as it does have one. Thanks for the help
Jim