What is a "gasser"?

A good book on the subject, if you can find a copy, is Gasser Wars: Drag Racing's Street Classics: 1955-1968, by Larry Davis.
 
Here is a picture of a gasser at last years NSRA show in York, PA. When the engine was running it would rattle your teeth from twenty feet away.
 

Attachments

  • York NSRA SR Nats '10 (22).jpg
    York NSRA SR Nats '10 (22).jpg
    76.9 KB · Views: 16
My first car was a 1930 Model A coupe, bought when I was 15 years old for $125. I immediately sought knowledge about installing a flathead engine in a Model A. Fortunately a neighbor, Cookie Stone, a older stock car racer turned drag racer offered valuable knowledge and assistance. So, at the tender age of 16, I owned a A/V8. I had bought a complete, running 221 flathead with a "Sportsman" cam, added 2X2s, milled the heads and Cookie taught me how to moderately port/polish the intake runners. I think the G/Gas rules were 11 lbs./cubic inch. The F/Gas rules were about 7 lbs./cubic inch.

At that time, 1961, the local drags was the "In" thing----so my first drag race was at age 16 at Union Hill drag strip. The car fit in G/Gas which was set up for flatheads and inline sixes. G/Gas was the slower of two flathead drag classes. I drove the car to the track, dropped the exhaust off, replaced the manifolds with six tubes---so I had a race exhaust.

I remember my first race very well. This was before the time of lights, so a real flagman was used. This evening, a "flagperson" was used, a good looking redhead, dressed in short-shorts, bandana top and well endowed. When I got up to the line for my race, the "flagperson" started swinging those things around, my eyes followed those things swinging---and I lost all track of why I was there. I suffered a terrible "holeshot"! But, not all was lost, because after the race, I removed the six exhaust tubes, replace the manifolds/ mufflers and drove to the local drive-in restaurant(which happened to be the first Shoney's and was a gathering place for teenagers). I had the "badge of honer" on the windshield(G/G, my number and an "X" which indicated that I was eliminated). For $1.00, I could buy a "Bigboy" sandwich, a order or onion rings and a large Coke. At midnight, Shoney's would close and everyone would go home. Ah, those were the good days!

Back then, most lower gas classes drove the cars to the track. Only higher classes(A/Gas, B/Gas, C/gas) were towed with a tow bar. No gas cars were trailered, only altereds and rails.

I remember winning the G/gas class once, at Cumberland drag strip, another local track. Winning the class was about $10. There were usually 6-10 cars in the class. I remember the pit pass and running your car was about $2.
 
Here's a bit of background back to 1956.
The term "Gasser' came from the Gas Class in drag racing. As was mentioned earlier is was weight to cubic inch with limited modifications. Most cars were driven to the track, raced, then driven home. Nobody had a trailer
A/Gas was 10# per cubic inch
B/Gas was 11# per cubic inch,
and so on thru, at the time, F/Gas.
When I was a kid, the A/Gas record holder was a Flathead powered Ford coupe @ 103 MPH. The B/Gas record holder was a 1933 Plymouth coupe with a Desoto Hemi. It went 106 MPH. Faster than the Ford, but not quicker. There were no timing lights for ET, only MPH. The A/Gas car was owned by my older brother's best friend David Hughes (deceased 1996, light plane crash). Before he passed away I spoke with him. Although the car had long been sold, he still had all the engine detail documentation and receipts from the engine builder, which he gave to me.
Jim
 
-----------------------------------------------------------------------

Lawson, you have to see them race to have a better understanding of what gassers are, so here
is a 3 minuet video showing some "A"-Gas cars running 180 mph in 7 seconds.

http://www.bing.com/videos/watch/vi...e6-398600242063?q=a-gas+drag+video&FORM=VIRE5

Cool video, but that Willys is not a traditional Gasser. These are Traditional Gassers:

http://www.youtube.com/watch?v=2_tnosQ9Jh8&feature=related

I know its OT, but since the question was asked.....
 
Lawson,About 40 years ago we used to run a circuit from one strip near B'ham to Atlanta, two tracks there and one was Covington I think.(memory's not too good anymore). Then to Albany and on to Phoenix City Al. and home in B'ham in time to go to work Monday morning.All 2 lanes. We ran a B gasser,'34 Willys 4 door. Injected Olds. Did OK.
 
Yeah the yellow one is most likely running alky in an IHRA sportsman class, or a massive nitrous shot on a 700 incher, a tube chassis car with a glass body, essentially a funny car with a Willys shape. The old gassers were more likely real steel cars with a frame. Most but not all of the gassers were set up in the front and utilized a straight axle to send the weight bias towards the rear, The straight axle was liked because it acted as one unit and offered the best control to a vehicle with the front up that high. I would rather watch a day of true gassers running 10's than outlaw or sportsman cars run 7's, it just brings me back in time to a better place.
 
The official name of the "gasser" classes was , by NHRA, Gas Coupes/Sedans, hence the title "gasser" Basically production bodies and frames with limited/specific modifications allowed. Engines were anything you could stuff in the engine compartment.
 
Back
Top