what Do I Have...??
- Thread starter jhexide
- Start date
DaWizard
BANNED
Well, first I'd say you might have a problem with photo alignment. Then after coming down from standing on my head, I would say you have a frame numbered AAA1778 something that is not readable.
The question I would ask is, did the fellow siting on the assembly line drunk that day, or did the hammer he had bounce on the A stamp a few too many times?
The question I would ask is, did the fellow siting on the assembly line drunk that day, or did the hammer he had bounce on the A stamp a few too many times?
DaWizard
BANNED
Ya know, that is a very good possibility. Musta been all the blood rushing to my head that blurred my vision.
Great Lakes Greg
Well-known member
$400 around here.
Ed Saniewski
Well-known member
Hey Bob, I'm with you on the date, aren't those brackets on the outside of the frame near the rear wheels for the 31 Slant windshield bodies?
Tom Wesenberg
Well-known member
Body style didn't matter, as they all used the same frame for the same time period of build.
Tom Wesenberg
Well-known member
No because the radiator pad area is lowered, which started at the end of 1929, and it also has the hole for the overflow pipe of the radiator. I'd have to look that one up to see when it started.
It also has the late style front wishbone with the X area at the rear, and that one I'd also have to look up, but I think it was late 30 or 31 when it started.
aonemarine
Senior Member
Front cowl bracket is set back and it has the rear body mount off the back of the frame....Makes me think Victoria.....
If local Ill give ya $500.00
If local Ill give ya $500.00