What carbs are these ?

[elwood]

Hey guys, I bought a old race car, and these carbs are on it.
They look like 94s to me, except they have a power valve on the outside, I took them apart to clean them, turns out they have a power valve on the inside and outside, and they are bigger than 94s ..

 

[Bob C]

I think they are EC from about 1954. The first picture looks like the
ultra rare side draft version.

Bob

 

[JSeery]

Little easier to see rotated. Interesting intake as well.

 

[38bill]

Holly carbs off a early Ford "Y" block??????

Intake looks like a Eddie Meyer's.

 

[Bruce Lancaster]

There are a bunch of variants of these carbs...the Model # is on driver's side of bowl, stuff like EC-6, and will ID the application. The outside valve is an extra kink in the vacuum system for the Holly distributor.

 

[paul2748]

What are the numbers on the side of the carb?

 

[tubman]

Holley 2100's or 2110's . Used on early "Y" blocks. Those aren't power valves. I believe they are called "Spark Control Valves". They look a lot like power valves, but are NOT interchangeable. If you took the carb apart, you'd find a regular power valve where it's supposed to be.

 

[VeryTangled]

Hi Everyone. I'm not usually a lover of two-carb setups, but THAT rig is flathead **** IMHO!

 

[Alaska Jim]

look like EBU carbs off early Y blocks. like what was stated before the valve on the out side is some sort of spark control valve.

 

[scicala]

If your carbs have the larger throttle bores that match the gasket in your picture with the larger holes, then you have the 1956 pass car (272 Y-Block) ECG6 Holley model 2110 carbs. It's possible they are ECG5' also (for '55 model year 272 Y-Blocks). Both have the larger 1 1/16" venturi's too. Highest air flow carb of this style that was factory installed on Ford cars because of the larger than flathead engine.

Sal

 

[elwood]

Thank you all very much for the help.
They are ECG6 carbs ...
I thought they where some sort of 94s lol