Welcome To The New Ford Barn!

Ryan-
I am searching past posts and typed a word wrong. I corrected the one letter that was wrong and searched again and got this:

"This forum requires that you wait 10 seconds between searches. Please try again in 5 seconds."

Why? Do people really abuse your system by searching too fast or too often?

I find it annoying.


Thanks.
 
Hi gang Been gone for 6 months had a hip replaced and yesterday bought a complete31 A running gear. Race of Gentleman I am a coming. Have a question Can I use 21 x 450 wheels and tires with hydralic brakes? I just recieved my copy of Les Andrews. It will be very Helpful Be talking to you tomorrow. Don in N. W. Indiana
 
Hi every one. We are new and I have been designated to post - hence - gogrannygo. Can't figure out how to post. We have a 1928 tudor and the motor completely out and disassembled. The mechanic is going to re-bore the head for new .040 pistons. The crank is out of round where the connecting rods attach and he is going to grind it. We need to order new insert rods, but MAC's can't tell us the size of the journal bearings so he will know what size to grind the crank to. Can anyone give us standard size that the crank should be ground to in order to fit the new rods? If it's .010 or .020 for the oversize rods, what should the crank be ground to? We are going to use the new insert connecting rods - twice as much as babbit, but that was his suggestion. Thanks in advance. Gogrannygo
 
Ryan - I appreciate the new format as well as all of your work (and courage). The tutorial did not come up for me and said "page cannot be displayed". Did I do something wrong?? Thank You in Advance. Joel R, Shaw, Fairport, N.Y.
 
Thank you Ryan and Shelly. I had gotten away because it was so cumbersome to use, this looks great - like the old Shelly days - GREAT!!
 
B model oiling

On the later b and 33/34 4 cyl engines,how is the rear main sealed,is it the same as the A engines,and is the oil supply to the rear main on these engines really presurised ,
My reason for asking is if I presurised the mains on my A engine will the rear main slinger be OK?
Thanks Lawrie
 
Re: B model oiling

Lawrie said:
On the later b and 33/34 4 cyl engines,how is the rear main sealed,is it the same as the A engines,and is the oil supply to the rear main on these engines really presurised ,
My reason for asking is if I presurised the mains on my A engine will the rear main slinger be OK?
Thanks Lawrie
Click to expand...

You need to put this in the general section as a separate thread. This is part of welcome thread.
 
Hello Everyone,

I am planning to ship a 1928 model a coupe to Belgium but i would like to order some patch panels and get them shipped with the car...
The lower cowl panels and the lower quarter panels i need for sure maybe floor? Does anyone know a good website to order and any idea of the price? Does this look an awfull job (on the pics) or managable... :) I have a very good welder as a friend (No experience myself)

thanks allot!!!
 

Attachments

  • 29coupe11 (21).JPG
    29coupe11 (21).JPG
    136.1 KB · Views: 18
  • 29coupe11 (32).JPG
    29coupe11 (32).JPG
    134.8 KB · Views: 16
  • 29coupe11 (33).JPG
    29coupe11 (33).JPG
    135.4 KB · Views: 16
  • 29coupe11 (34).JPG
    29coupe11 (34).JPG
    139.2 KB · Views: 14
kersten said:
Hello Everyone,

I am planning to ship a 1928 model a coupe to Belgium but i would like to order some patch panels and get them shipped with the car...
The lower cowl panels and the lower quarter panels i need for sure maybe floor? Does anyone know a good website to order and any idea of the price? Does this look an awfull job (on the pics) or managable... :) I have a very good welder as a friend (No experience myself)

thanks allot!!!
Click to expand...

This is the welcome section. You need to put your request in the main Model A forum;

http://www.fordbarn.com/forum/forumdisplay.php?f=3
 
You must log in or register to reply here.
Back
Top