Wanting ideas on good downdrft carb

[1931 flamingo]

Isn't edelbrock reproducing the 94?? Lots of bad things on the hamb about speedway's 97.
paul in CT

 

[Jim Brierley]

I've run both a single 81 and a single 97, and the 97 ran as good throughout the RPM range and developed more power overall. Always start with stock jetting, and tune from there.

 

[john in illinois]

Does a heated manifold or unheated manifold work best with a Stromberg?

John

 

[barron]

I made my intake, used the elusive FISH carb, tons of power, no pump, just works

 

[barron]

the pudding

 

[ken ct]

I have most anything you need in carbs,strom 81's ,ford-holley 81-92 ,strom 97's and ford #847 6cyl ones all fresh rebuilds. ken ct PM or Email. Also have a bell crank,not sure if 1 is needed with a single carb. Bolts to intake and cast alum and kind of Y shaped w/o the lower leg. hooks to carb and throttle rod. brand new.

 

[kelley's restoration]

I have most anything you need in carbs,strom 81's ,ford-holley 81-92 ,strom 97's and ford #847 6cyl ones all fresh rebuilds. ken ct PM or Email

ken is a good guy to deal with
for whats its worth
tk

 

[denis4x4]

I'm running a pair of the English 97's on my roadster and the Ford six carb on a Stromberg-Bendix manifold on my 1929 CCPU. I recently sold an EFI setup that used the Ansen manifold and it worked great.

 

[Rowdy]

Planning on running a 97 LZ here. Still looing for an older single downdraft manifold for it. Don't really have the money for it right now, so just window shopping mainly at this point. have a 5.9 BF head and a Stipe B cam. Along with oversized intakes it should be pretty decent. Rod

 

[Milton]

I think your friend will find out he is overcarbureted.

Charlie Stephens

Oh I don't know about that.

 

[ken ct]

ken is a good guy to deal with
for whats its worth
tk

Thanks Tom appreiaciate it. You were a pleasure to deal with. ken ct.

 

[Geo. H]

I use an early 94. Good power and good milage once I had it dialed in right.