WANTED Top Bow Patterns PLEASE ASSIST!!!

"BICK I am talking about the WIDTH of the wood Bow...not the Top Irons., I need to know the width..YES with the drawing above your front to center iron would be 22 for early and mine 23" for mid to end. "
Sorry Mark I assumed you were talking about the irons / sockets. I also would be interested in seeing some correct dimensions for the wood bow. Most here are just happy to have something to support the top material.
 
Marco, I got it..Do you happen to have any drawing that show the "ribs" that is what i needed to be able to have made. Bill said that most of the repos today are BAD and cause him only problems, That was the main intention of my post to start to be able to see a drawing of the "ribs" let me know and thanks again.......
 
Hi guys,
I came across this post and would like some help if possible.
I want to build a fold down top for my 28 Roadster Pickup and need to know the lenght/ height of the three bows. It seems as if the early 28 Roadster front bow was 22 inches from the hinge. Could I use these dimentions for the Pickup or are they much shorter inside?
Can anyone help me with the lenght/ height of the mid and the rear bows to the hinge hole?
Any suggestions wil be appreciated.
 
Last edited:
You must log in or register to reply here.
Back
Top