Wanted front floor pan/transmission cover

Hi Steve,
I may have what you need. Do you want the steel floor pan or the aluminum one? I will have to look tomorrow to see which one I have left up in the rafters of my shop. If interested call me at 802-869-2688 or e-mail me at jen.toby@yahoo.com Thanks, Toby
 
I would rather have the steel one, it's the pan that goes from driver's side to passenger side, over top of transmission and has holes for clutch, brake pedal and accelerator. The one I have is steel, but has some rust. Thsnk for responding.
 
I've learned something about floor pans, if you've got a good aluminum, please e-mail me leave your phone number and I'll give you a call, let me know a good time.
 
still looking for the steel floor pan , I got one that came out of a 39 truck . can send pictures , just send me your email . thanks, Aaron
 
Hi Steve,
I got down to my parts car and picked up the other floor pan. It is really in good shape. It is aluminum, it is not cut anywhere, but has a little distortion around one of the pedal holes, other than that it is very nice. Remember, these don't show after they are installed. The bottom gets some form of rustproofing, the top gets screwed down, covered with jute (or sound proofing of some kind), then gets a rubber floor mat, and sometimes even some carpeting. Even the little distortion around the pedal hole will be covered with the pedal seals so there really are no major issues. You can buy a reproduction in steel for $165 from outfits like Mac's but they will definitely not outlast an aluminum floor. Think about it. Best wishes, Toby
 
You must log in or register to reply here.
Back
Top