Wanted: 35-36 cast rear wishbones & front

Bondolero

Bondolero

Senior Member
City
chandler
State
az
WTB: Nice pair of 35-36 rear wishbones with the spring mounts on the back. Will also buy front wishbone from same model or 33-34.
 
Could very well be, the 36 is the one I am familar with. I want the rear ones that are cast rather than round steel, very much resembling the cast front axles. Since the 39 are the rear mount cross spring style, they may be what I need. I think the axle mounts are made on the back of the wishbones. Will step up for a nice pair that can be plated.

thank you
Larry
 
The 36 rear rods bolt to the bottom of the rear end 2 bolts. That is the only year that Ford did that.The 36 has the spring hangers on them. all the rest of the years the spring hangers were welded to the rear end.More or less,the 36 is a one piece unit,one for each side and all you need is the brackets on each side of the bottom of the rear end with two holes in it and you can bolt your radius rods up.Have a nice pair of them. Ken 256-436-6924
 
I have a pair from my 35 pick up. I'm in new england,they will need to be sand blasted and new sleeves in the ends but otherwise are good. 25.00 a piece plus shipping PM me if interested Jim
 
You must log in or register to reply here.
Back
Top