Wanted 1938 Pickup parts

Panel Pete

Panel Pete

Junior Member
City
California
State
Livermore
I am looking for the following pieces/parts for my 1938 ford 1/2 ton pickup project.

1)Seat - so long as the frame and springs are usable - having a template for the wood would be a nice bonus

2) Side view mirror arm

3) Tin type door panels (I believe these were used on the 1939 model trucks)

4) Windshield wiper cover, goes above the windshield. I have one that is rusted through on the passenger side, If needed I could splice a patch out of another one that might have driver side damage.

5) Fuel pump push rod for a 59AB engine


Parts located and purchased - Thanks!


Throttle and Choke rods

Hood latch/ornament

Transmission cover

Rear window interior garnish molding and trim pieces

Wiper actuator motors

Stainless Head light trim rings

Radiator support rods

Interior trim that goes over the doors.

Interior A pillar windshield trim pieces for the left and right of the windshield.

Wiper arms for driver and passenger side

If you have any of the above items for sale I'd sure appreciate a P.M. with pictures of the part(s) and price(s). I'm sure that I'll be adding to the list as work on the old girl continues. As far as shipping goes I'm located in Livermore CA 94550.

Thanks in advance,
Pete
 
Last edited:
On #5, the upper floor panel is steel and the lower floor panel is plywood. I have seen many of the other items that you are looking for on e bay.
 
V12Bill said:
On #5, the upper floor panel is steel and the lower floor panel is plywood. I have seen many of the other items that you are looking for on e bay.
Click to expand...

Bill,

That explains why all of the lower floors I've seen are made of plywood! In my online searches I've found that C&Q early ford parts offers replacements - I figured that if replacements were made they were offered from the factory.

Thanks,
Pete
 
I can likely help with 11,12, and 13. I just finished a 38 pickup and am in Placerville. Call if you need help.

Gary

916-837-7170
 
You must log in or register to reply here.
Back
Top