WANTED:16"x5" MERC/LINCOLN wheels

R

rodomotive

Member
City
Vancouver
State
WA or B.C.
Need a pair of 16" x 5" steel wheels with 5 on 5 1/2" bolt pattern and internal nubs or clips for inside mount hub caps. I believe these wheels were from 1941 Mercury and Lincoln.
Thanks, Jeff
 
I have a set of 15" x 5-1/2" wheels with the 5-1/2" bolt patteren and nubs on the inside for hubcaps. These are original ford wheels that i had on my 1946 ford coupe. used the original 1946 hubcaps on them. I'd want $200 for the set of 4 wheels plus shipping. They are in very nice shape. I ran radial tires on them tubless.
Larry
 
Jeff, I have one wheel. Here are some pictures of it. I want $50.00 plus shipping for it. Thanks, David Atkins
 

Attachments

  • Picture 305.jpg
    Picture 305.jpg
    86.1 KB · Views: 32
  • Picture 306.jpg
    Picture 306.jpg
    81 KB · Views: 38
I have a Lincoln 16x5 with 5.5 bolt pattern and the wheel is even in Canada. Although at the over side of the country. The wheel has the clips for a hub cap and they are in good shape. I believe the wheel should clean up pretty good. Beads are not heavily pitted from rust.
 

Attachments

  • Lincoln16x5-5.5 001 (Small).jpg
    Lincoln16x5-5.5 001 (Small).jpg
    85.2 KB · Views: 31
  • Lincoln16x5-5.5 002 (Small).jpg
    Lincoln16x5-5.5 002 (Small).jpg
    78.2 KB · Views: 23
  • Lincoln16x5-5.5 003 (Small).jpg
    Lincoln16x5-5.5 003 (Small).jpg
    79.9 KB · Views: 22
  • Lincoln16x5-5.5 004 (Small).jpg
    Lincoln16x5-5.5 004 (Small).jpg
    66 KB · Views: 25
Last edited:
Would the ford f-1 wheels work for you. They're 16 x 5 or 5 1/2 with nubs on the
inside. I can't tell the actual width because they have worn out tires on them.
 
You must log in or register to reply here.
Back
Top