W?hat is this

Hondamate

Member
What is this horn thing and what is that metal tube coming off of the intake manifold? Thanks
 

Attachments

  • 137901_Engine_Web.jpg
    137901_Engine_Web.jpg
    72.4 KB · Views: 184
  • 1931_Ford_Model_A_roadster_engine.jpg
    1931_Ford_Model_A_roadster_engine.jpg
    77.2 KB · Views: 173
hello
not sure about the horn thing but the tube from the in take is a vacume line for the wiper motor
kevin
1930 model a tudor
1923 model t roadster p/u
 
The "horn" is the intake for a heater. It ducts air over the hot exhaust manifold into the car for heat. Usually there is a hole cut in the firewall behind the manifold heater to pass the heat and it doesn't look like your car has the hole cut. This was an aftermarket accessory for the Model A since they did not come from the factory with a heater. The line coming off the intake manifold supplies vacuum pressure to run the windshield wiper.
 
hello
not sure about the horn thing but the tube from the in take is a vacume line for the wiper motor
kevin
1930 model a tudor
1923 model t roadster p/u

Thanks

The "horn" is the intake for a heater. It ducts air over the hot exhaust manifold into the car for heat. Usually there is a hole cut in the firewall behind the manifold heater to pass the heat and it doesn't look like your car has the hole cut. This was an aftermarket accessory for the Model A since they did not come from the factory with a heater. The line coming off the intake manifold supplies vacuum pressure to run the windshield wiper.

Ok, my model aa has the hole. Thanks
 
On the choke rod you should have a long spring that pushes the grommet against the firewall. Your's looks to be in the middle of the rod.
 
Back
Top