Vicky rear garnish moldings

[Weaponsusmc]

I have a 31 Victoria that's missing the rear garnish molding, does any other A rear molding fit?

 

[Phil Brown]

I believe that there unique to that body style
But just saw these https://www.ebay.com/itm/1660455186...uid=SwIuF1nYQ96&widget_ver=artemis&media=COPY

 

[Weaponsusmc]

Thank you Phil, just need the back window.

 

[Phil Brown]

the very back window just might be the same as some other models but I just dont know for sure

 

[Oldbluoval]

Back window frame same in slant fordor

 

[Bill Cilker]

Technically speaking there are 2 slightly different rear window frames for a Victoria. There is one for a Leatherback and one for a Steelback. When I compared the two side by side, the only difference was that the opening on the wood side of the frame was slightly wider on the SB frame. I have not compared the SW sedan rear frame with a Victoria frame, but they are both 26" wide windows so they might be interchangeable as Oldbluoval says.

 

[Oldbluoval]

Bill…
Good point on steel back and leatherback.
Not familiar with leatherbacks much.

 

[Bob Bidonde]

Bill, your comment re the back window frame is good stuff for The Bustle. Thanks for posting.

 

[Weaponsusmc]

Thanks for all the information, nothing was adding up with my Vicky rear window, its 28 inches give or take. I called the fellow asked the previous owner, said the guy before him put a 50 ford pickup rear window in it.