venturesomerite
Member
- City
- Hamden
- State
- CT
- Price
- varries
I have a whole bunch of 57 ford fairlane parts, some only fit 4 door, some fit all models (depends on the part)
off the top of my head I have:
Prices are negotiable, all items are marked for swap meet, I'm not going to go through a look at, and list every part and price. I'm more than willing to give you a better deal for a bunch of stuff if you want it.. You can ask about the prices, or make an offer. I will sort through and find what they are marked.
I probably have more than this, it's just what I can think of at the moment.
Items for local pick up only:
all 4 doors from a fairlane 4 door (edit sold)
back two doors from a 4 door custom 300c (edit sold)
three on tree column with wheel, shifter, indicator, and box
auto column with box and shifter
early 60's auto trans (tail, trans, bellhousing, torque converter) - the style has has a cooler
3 speed manual trans
drive shaft that fits the 3 speed (came from fairlane 4 door)
1 ybock to 3 speed bell housing
1 1957 straight six bell housing
1 t-10 t10 bell housing
trans cross member
1 front and 1 rear bumper (believe the front has bumperettes on it and I have the ones for the rear)
splash pan under grille (a little rot where it meets the fenders - $15
2 sets of (4) 14" rims with garbage tires on them - (sold)
1 set of (4) 14" rims with new small white wall tires (not wide) - about 200 miles on them, were taken off of a car that was converted to front disks and they did not fit. Mounted and balanced, new stems, P205/75/14 with roughly 1 &1/4" white walls (NOT wide whites) - $350 for set.
dash
vent cowl between hood and windshield
one of each - front - driver and pass 4 door main side glass.
I know I have one of the side vent trims with glass and one without, but cannot recall which side is which at the moment.
Items I will ship:
3 sets of 4 57 ford hub caps. Some have dents, some don't - They should all polish up nice
$15 a hub cap
the complete wiper pulley system from under the cowl including cables and the vac motor - $80
boxes of misc trim parts like ash tray, molding, pillar trim etc.
and I'm sure more, I just don't want to list every single thing.
I am willing to barter for almost anything, especially 55-56 ford car parts, tools, motorcycle stuff etc. Just make a reasonable offer if you want.
If you'd like to come take a look, we can set up a time and day.
Email or call. If you're local feel free to come take a look.
two zero three two one eight eight seven six six
Briancurban at yahoo dot com
Brian
off the top of my head I have:
Prices are negotiable, all items are marked for swap meet, I'm not going to go through a look at, and list every part and price. I'm more than willing to give you a better deal for a bunch of stuff if you want it.. You can ask about the prices, or make an offer. I will sort through and find what they are marked.
I probably have more than this, it's just what I can think of at the moment.
Items for local pick up only:
all 4 doors from a fairlane 4 door (edit sold)
back two doors from a 4 door custom 300c (edit sold)
three on tree column with wheel, shifter, indicator, and box
auto column with box and shifter
early 60's auto trans (tail, trans, bellhousing, torque converter) - the style has has a cooler
3 speed manual trans
drive shaft that fits the 3 speed (came from fairlane 4 door)
1 ybock to 3 speed bell housing
1 1957 straight six bell housing
1 t-10 t10 bell housing
trans cross member
1 front and 1 rear bumper (believe the front has bumperettes on it and I have the ones for the rear)
splash pan under grille (a little rot where it meets the fenders - $15
2 sets of (4) 14" rims with garbage tires on them - (sold)
1 set of (4) 14" rims with new small white wall tires (not wide) - about 200 miles on them, were taken off of a car that was converted to front disks and they did not fit. Mounted and balanced, new stems, P205/75/14 with roughly 1 &1/4" white walls (NOT wide whites) - $350 for set.
dash
vent cowl between hood and windshield
one of each - front - driver and pass 4 door main side glass.
I know I have one of the side vent trims with glass and one without, but cannot recall which side is which at the moment.
Items I will ship:
3 sets of 4 57 ford hub caps. Some have dents, some don't - They should all polish up nice
$15 a hub cap
the complete wiper pulley system from under the cowl including cables and the vac motor - $80
boxes of misc trim parts like ash tray, molding, pillar trim etc.
and I'm sure more, I just don't want to list every single thing.
I am willing to barter for almost anything, especially 55-56 ford car parts, tools, motorcycle stuff etc. Just make a reasonable offer if you want.
If you'd like to come take a look, we can set up a time and day.
Email or call. If you're local feel free to come take a look.
two zero three two one eight eight seven six six
Briancurban at yahoo dot com
Brian
Last edited: