Valve Installation Tool

[Vintage Copper 47]

I am looking for that specialty tool that compresses the valve springs when installing/removing the valves.. I've attached a youtube video showing the tool (at the 3 min/38 sec mark).. What is the proper name of this tool & the second tool.. and where can I get one?
https://www.youtube.com/watch?v=DuyPOkCXIT8

Thanks for any info

 

[flatheadmurre]

Valve spring compressor and keeper installation tool...
https://www.ebay.com/itm/Vintage-US...097390?hash=item3fb629442e:g:7q0AAOSwMKVcLsSD
https://www.ebay.com/itm/Vintage-Su...=item3b26142097:g:Sf8AAOSwww9b9IAM:rk:27:pf:0
A normal valvespring compressor works to if you have one at hand...

 

[19Fordy]

Here's another very commonly used style.
https://www.ebay.com/itm/Vintage-Le...h=item214fa2477b:g:E60AAOSwvcFcJloD:rk:1:pf:0

Mr. Van Pelt also describes several very helpful tools.
http://www.vanpeltsales.com/FH_web/flathead_valveremoval_tools-2.htm

 

[big job]

Thats the one we use think its a "KD" from Napa. You want the one with the star wheel
the ratchet ones maybe good for a model T or A where there is room, but not for a V8
its tight quarters down there.

 

[flatheadmurre]

Here's another very commonly used style.
https://www.ebay.com/itm/Vintage-Le...h=item214fa2477b:g:E60AAOSwvcFcJloD:rk:1:pf:0

Mr. Van Pelt also describes several very helpful tools.
http://www.vanpeltsales.com/FH_web/flathead_valveremoval_tools-2.htm

Working with the KD bar and the 918 clamp on a H motor doesn´t work to good.
Using the KD 918 on a G motor you need an adapter between the clamp and the deck to compensate for the bigger inlet valve,

 

[Vintage Copper 47]

Working with the KD bar and the 918 clamp on a H motor doesn´t work to good.
Using the KD 918 on a G motor you need an adapter between the clamp and the deck to compensate for the bigger inlet valve,

Thanks!