V8 Clutch and Pressure Plate

[29FordRoadster]

I am in the need of replacing my clutch on my Model A. Can anyone give me some pros and cons to installing a V8 clutch and pressure plate as opposed to a regular model a clutch and pressure plate. Any information will be appreciated. Thanks in advance. 29FordRoadster

 

[James Rogers]

You can call me tomorrow and I will give you the low down on the setup. The land line # is on my website.
http://www.model-a-ford-4bangers.com/

 

[John LaVoy]

Another option is the diaphram clutch. Joe Way who posts here did an article on using one in a Model A in the Model A Times Vol 6 Issue 2.

 

[ajohn]

You will likely be pleased with the results.Less pressure required to release the clutch and the lightened flywheel will perk up the engine.

 

[TinCup]

Just replaced the clutch and pressure plate along with taking 20 pounds off the flywheel. I would do it again in a heartbeat.

 

[29FordRoadster]

Thank you Mr. Rogers for taking the time to talk with me on the phone this morning. Your comments will be very helpful to me in making a decision. 29FordRoadster