Universal Lube Issue

Ed Solari

Senior Member
The universal on the 34 and other year Fords is in a grease cavity. BUT looking at the Service bulleton it says use "cyclinder oil thinkened with sodium tallow soap"... I assume that this is thinner than a grease used on the other parts of the chassis with a viscosity of 150to 220. So I assume that this "special" stuff for the universal is thinner to help get internal to the bearing surfaces but if too thin it will leak out of the bell housing on the torque tube. SO ANY THOUGHT ON THE BEST GREASE TO USE?

Thanks
 
John Deere corn head grease. It liquifies under use then thickens again after shut down. It works the best of anything that I'm aware of.

Kerby
 
Ed: Can not get the old style grease anymore. Just be sure you use a grease that is low temp, I use Costal and buy it at Auto Zone. I think the melting point is 250 deg's. A high temp grease will cut out a cavity and not lube the Ujoint. Hope this helps...Tom..
 
John Deere corn head grease. It liquifies under use then thickens again after shut down. It works the best of anything that I'm aware of.

Kerby

That is what I have read from others who use it. Seen a video of it working but can't remember the site.

Vergil
 
Last edited:
Back
Top