V8COOPMAN
Well-known member
.
Fred A is most-assuredly fired-up with V8-60 stuff lately. Again, I'm proud to help Fred post some of this hard-to-find info and pictures. Coop
_________________________________________________________
_________________________________________________________
Fred Albrecht
In 1937, the V8-60 engine was introduced to domestic service. Along with passenger cars, the tiny engine was also available in COMMERCIALS, as well as in some Trucks, most likely on orders from the top. All the full sized Model 73 three speed transmissions I've torn down (picture BELOW) came with the 14/29 gearset, otherwise they sized to be able to use the other gearsets, Like a 78 case for the 60. A four-speed crash-box was also available for the Trucks. By 1940 the little 60 became a has-been in spite of the improvements like the Chandler-Groves design, carburetors, the crankcase venting, a chank-shaft-mounted fan that doubled as a vibration dampener, and larger crankshaft bearings. The 1940 passenger car boasted a quieter shifter on the steering column. Three on the tree, if you will. Instead of modifying the little toy trans of previous years, a full sized side-shift (picture left) case was added. All '40 passenger transmissions fit the full size gearsets. Despite their appeal as a full size top-shift, the 73-7006 cases are useless without the proper 73-7515 throw-out bearing fork. At least one 'Barner was not a believer. Jambing failure. Good Luck: Fred A
Fred A is most-assuredly fired-up with V8-60 stuff lately. Again, I'm proud to help Fred post some of this hard-to-find info and pictures. Coop
_________________________________________________________
_________________________________________________________
Fred Albrecht
In 1937, the V8-60 engine was introduced to domestic service. Along with passenger cars, the tiny engine was also available in COMMERCIALS, as well as in some Trucks, most likely on orders from the top. All the full sized Model 73 three speed transmissions I've torn down (picture BELOW) came with the 14/29 gearset, otherwise they sized to be able to use the other gearsets, Like a 78 case for the 60. A four-speed crash-box was also available for the Trucks. By 1940 the little 60 became a has-been in spite of the improvements like the Chandler-Groves design, carburetors, the crankcase venting, a chank-shaft-mounted fan that doubled as a vibration dampener, and larger crankshaft bearings. The 1940 passenger car boasted a quieter shifter on the steering column. Three on the tree, if you will. Instead of modifying the little toy trans of previous years, a full sized side-shift (picture left) case was added. All '40 passenger transmissions fit the full size gearsets. Despite their appeal as a full size top-shift, the 73-7006 cases are useless without the proper 73-7515 throw-out bearing fork. At least one 'Barner was not a believer. Jambing failure. Good Luck: Fred A