Two barrel card spacer with pcv

[zoegrant]

Does any company make a two barrel carb spacer with a PCV port ??

 

[Anteek29]

If not, should be easy to make?

 

[KULTULZ]

Does any company make a two barrel carb spacer with a PCV port ??

What year and carb style? You are upgrading?

 

[streetdreams]

if you're using a 2100 Ford 2 bbl, just about any mid to late '60s 302 or 351W has what you want

 

[5851a]

If you go past 1972 generally you will find it will have a egr valve attached.

 

[paul2748]

I have seen them advertised, but don't remember the vendor.

 

[Hot Rod Reverend]

Check speedway automotive for the Stromberg style 2 barrels (3 bolt mounting bases) - they should have different heights. Also... and I hate to say it, ebay.

https://www.ebay.com/itm/For-Stromb...881234?hash=item3d94f1d312:g:9bAAAOxydB1Si8re

 

[poolplayer1]

Go to Ebay and in the search bar, type in C4AE-9A589-D and take a look at that spacer.Might be what you are looking for.

 

[zoegrant]

I need a 3 bolt mounting base not the 4 bolt...please let me know is someone runs across a supplier...thanks

 

[40cpe]

Here you go:

https://www.jalopyjournal.com/forum...t-2-beveled-for-stromberg-type-carbs.1172600/

 

[KULTULZ]

Here you go:

https://www.jalopyjournal.com/forum/threads/3-carburetor-spacers-1-with-vacuum-port-2-beveled-for-stromberg-type-carbs.11726/

Perfect.

Too bad the vendor wasn't listed. Should also consider a phenolic spacer between the carb spacer and carb body.

 

[zoegrant]

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

 

[paul2748]

The seller looks to be a HAMB member (2900 plus posts). It looks like you will have to get a screw in nipple to attach a hose. Contact the seller for info if you are a HAMB member

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

 

[40cpe]

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

Click on the HAMB link. You will have to ask those questions to the seller.

 

[Neal]

Don't the gas heaters (southwinds) have what you are looking for? I do not know if the port is the correct size.


The picture above looks like one.