Cool Hand Lurker
Well-known member
Cover it with heat-shrink poly. They use it to deliver new boats all the time.
I would put a blanket over the car first for cushioning against damage, then wrap it and tape all the joints with poly tape, even around the bottom. Better yet, put the poly on the trailer bed first, roll the car on, then pull the edges of the poly up and tape on a cover sheet over the top. Shrink with an electric heat gun until tight.
You can get the poly sheet in rolls from www.mcmaster.com in many sizes.
Like 7mil x 12' x 150' roll that will cover about 75 cars for $235 plus shipping. That is about $3 per car. You can sell off the extra to other car guys and make a bundle?
I have no connection to McMaster-Carr.
Here is a link to the right page in their catalog.
https://www.mcmaster.com/browse-pac...rotective-fill/heavy-duty-heat-shrink-film-6/
I would put a blanket over the car first for cushioning against damage, then wrap it and tape all the joints with poly tape, even around the bottom. Better yet, put the poly on the trailer bed first, roll the car on, then pull the edges of the poly up and tape on a cover sheet over the top. Shrink with an electric heat gun until tight.
You can get the poly sheet in rolls from www.mcmaster.com in many sizes.
Like 7mil x 12' x 150' roll that will cover about 75 cars for $235 plus shipping. That is about $3 per car. You can sell off the extra to other car guys and make a bundle?
I have no connection to McMaster-Carr.
Here is a link to the right page in their catalog.
https://www.mcmaster.com/browse-pac...rotective-fill/heavy-duty-heat-shrink-film-6/
